Replaces

1998-2002 Olds Intrigue Front Sway Bar Kit

Part Details

  • Location: Front

This part replaces:

  • DORMAN 927-100
  • HOLLANDER 524-00288
  • OE # 10257316, 10284146

  • New

Your front sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Over time the end links, bushings, brackets, ball & socket joints can wear causing loose connections, or even come apart and fall off.

The original sway bar that this kit replaces was hollow, which over time will cause the stabilizer bar to develop dangerous pin holes. Once the pin holes start, there is nothing that can stop the eventual failure of this bar.

The sway bar that comes in this kit is solid, so no worries in the future of pin holes or rot through.

This set has the following specifications:

  • Solid design
  • Built to strict quality control standards
  • Fits in the front of the vehicle
  • Fits only FWD (Front wheel drive) vehicles
    • Does not fit 4WD (4 Wheel Drive) Models
  • Stabilizer Bar Diameter: 33mm
  • It is a complete set that includes the following pieces:
    • Qty (1) - Redesigned Front Stabilizer Bar (commonly called sway bar)
      • Replaces dealer part numbers: 10257316, 10284146
    • Qty (2) - Stabilizer link packages
      • Replaces dealer part numbers: 10285683, 10292672
    • Qty (2) - Stabilizer Bar Bushings
      • Replaces dealer part numbers: 10275555, 10292499, 10290651, 10284149
    • Qty (2) - Stabilizer Bushing Brackets
      • Replaces dealer part number: 10445399
    • Qty (4) - Bushing Bracket Bolts

If you can hear your sway bar rattling on a bumpy road it may be time to replace it. This installation kit from 1A Auto gives you everything you need to do the job right the 1st time, while saving you time and money by not having to run around collecting different parts! Get back that original feel to your vehicle now with this sway bar kit from 1A!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel (1:15 in the video)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
  2. Remove the stabilizer link. (4:42 in the video)
    • Jack up the control arm to relieve pressure.
    • Remove the 13 mm nut and use a pair of vise grips on the bushing to remove the stabilizer link.
  3. Remove the sway bar (3:19 in the video)
    • Unbolt the two 15 mm bolts securing the mounting brackets.
    • Pull off the bushings and remove the sway bar.
  4. Install the new sway bar (5:00 in the video)
    • Slide the sway bar into place.
    • Put the bushings on and clip the brackets on.
    • Install the stabilizer links.
    • Put the bushings into place and thread in the stabilizer link bolt and screw down the nut at the top.
    • Bolt in the sway bar brackets using your socket and wrench.
  5. Put the wheel back on (10:45 in the video)
    • Hand tighten the lug nuts.
    • Lower the car.
    • Torque the lug nuts, using a star pattern to 100 ft lbs.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Penetrating Oil

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Sockets - SAE

  • 1/2 Inch Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands

How-to Video:

(11:39 min)

Tools List:

    Materials, Fluids, and Supplies

  • Penetrating Oil

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Sockets - SAE

  • 1/2 Inch Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands



This part replaces:

  • DORMAN 927-100
  • HOLLANDER 524-00288
  • OE # 10257316, 10284146

Vehicle Fit

  • 1997-2005 Buick Century Front Sway Bar Kit
  • 1997-2004 Buick Regal Front Sway Bar Kit
  • 2000-2013 Chevy Impala Front Sway Bar Kit
  • 2000-2007 Chevy Monte Carlo Front Sway Bar Kit
  • 1997-2001 Chevy Venture Front Sway Bar Kit
  • 2002-2005 Chevy Venture Front Sway Bar Kit (excluding All Wheel Drive Models)
  • 1998-2002 Olds Intrigue Front Sway Bar Kit
  • 1997-2001 Olds Silhouette Front Sway Bar Kit
  • 2002-2004 Olds Silhouette Front Sway Bar Kit (excluding All Wheel Drive Models)
  • 1997-2008 Pontiac Grand Prix Front Sway Bar Kit
  • 1999-2001 Pontiac Montana Front Sway Bar Kit
  • 2002-2005 Pontiac Montana Front Sway Bar Kit (excluding All Wheel Drive Models)
  • 1997-1998 Pontiac Trans Sport Front Sway Bar Kit
$99.95
Save 59%
List: $245.14 Save: $145.19
Part #: 1ASSL00020

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est