Replaces

1992-2011 Ford Crown Victoria Front Sway Bar Bushing Pair

Part Details

  • Front / Rear Location: Front
  • Quantity: Pair

This part replaces:

  • OE # YW7Z 5493 AA

  • New

These replacement sway bar bushings are just what you need to bring back the safety and integrity of your vehicle's suspension.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacements
  • Built to strict quality control standards
  • Fit models with Stabilizer Bars UNDER 27mm in diameter

Worn bushings can cause excessive tire wear, popping or creaking, and pose a serious safety concern. Replace your old bushings now with these high quality replacements!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Raise and secure the vehicle (1:04)
    • Lift and secure your vehicle with its model specific safe support points.
    • Make sure your jack stands are set and the correct height on an even surface and your e brake is on if all four wheels aren’t off the ground.
  2. Remove the stabilizer link (1:45)
    • Use a wrench to remove the nuts on the top and bottom of the stabilizer link.
    • Use a second wrench to add leverage to the first one you are using.
    • Secure the stabilizer link with the adjustable wrench to secure a Torx bit to remove the nuts the rest of the way with your wrench.
    • Continue finessing the wrenches and Torx Bit till your successfully work the stabilizer bar out.
    • Remove the stabilizer link.
  3. install the new stabilizer link (7:14)
    • Thread the stabilizer link, bushings and washers into the steering knuckle and sway bar.
    • Use your wrenches to secure the link and a socket and ratchet to tighten it up.
  4. put the wheel back on (8:29)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Torx Drivers & Sockets

  • T40 Torx Bit

  • Wrenches - SAE

  • Complete SAE Wrench Set

How-to Video:

(09:06 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Torx Drivers & Sockets

  • T40 Torx Bit

  • Wrenches - SAE

  • Complete SAE Wrench Set



This part replaces:

  • OE # YW7Z 5493 AA

Vehicle Fit

  • 1992-2011 Ford Crown Victoria Front Sway Bar Bushing Pair
  • 1991-2011 Lincoln Town Car Front Sway Bar Bushing Pair
  • 1992-2011 Mercury Grand Marquis Front Sway Bar Bushing Pair
  • 2003-2004 Mercury Marauder Front Sway Bar Bushing Pair
$21.95
Part #: 1ASMX00212

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est