Replaces

1998-2002 Mazda B4000 Truck 4 Wheel Drive Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Upper Control Arms with Ball Joints
  • Quantity: 4 Piece Set

This part replaces:

  • Reference Number K8695T
  • Reference Number K8708T
  • Reference Number K8710T
  • Dorman 520-221
  • Dorman 520-299
  • Hollander 511-01057AL
  • Hollander 511-01056AR

  • New

Specifications:

  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the Wheel (1:59)
    • Pull off the center cap
    • Loosen the lug nuts
    • Remove the cotter pin and loosen the 35mm hub nut
    • Loosen the seven 13mm 12-point bolts that hold the axle to the front drive
    • Raise and secure the car
    • Remove the wheel
  2. Loosen the Torsion Bar (2:54)
    • Spray the torsion bar with spray paint and loosen the torsion bar tension bolt with an 18mm bolt
  3. Remove the Tie Rod (3:45)
    • Use a pair of pliers to remove the cotter pin
    • Remove the nut at the end of the tie rod
    • Use a tie rod puller to separate the tie rod
  4. Remove the stabilizer links (5:25)
    • Use a 9/16 wrench to secure the bottom and a 14 mm socket to unbolt the stabilizer link
    • Use a hammer and punch to remove the stabilizer link
  5. Pull the Axle from the CV Joint (6:52)
    • Unbolt the seven bolts, using a pry bar to keep the hub from rotating
    • Remove the hub nut using a 35 mm socket
    • Give the axle a tap with a hammer and pull the axle out
  6. Remove the Ball Joint (9:00)
    • Use a jack and wood plank or two to lift the control arm and relieve tension from the ball joint
    • Unbolt the the ball joint using a breaker bar and 27mm socket
    • Use a ball joint removal tool to pull the ball joint apart
    • With a ball joint press, remove the ball joint completely
    • See Part Two for reassembly

Tools needed for replacement:

    General Tools

  • Center Punch
  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Marker / Writing Utensil
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • Ball Joint Press
  • Tie Rod Puller

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Frequently Asked Questions:

Does this part come with the grease fittings already installed?

  • <p>This part is ready to be installed and does not require pre-greasing before use.</p>
  • Does this part come with the grease fittings already installed?

  • <p>This part is ready to be installed and does not require pre-greasing before use.</p>

  • How-to Video:

    (13:53 min)

    Tools List:

      General Tools

    • Center Punch
    • Floor Jack
    • Hammer
    • Jack Stands

    • Materials, Fluids, and Supplies

    • Block of Wood
    • Marker / Writing Utensil
    • Rust Penetrant

    • Pliers, Cutters & misc Wrenches

    • Needle nose pliers

    • Ratchets & Related

    • 1/2 Inch Breaker Bar
    • A Piece of Pipe (for leverage)
    • Ratchet
    • Socket Extensions

    • Screwdrivers & Related

    • Pry Bar

    • Sockets - Metric

    • Complete Metric Socket Set

    • Specialty Tools

    • Ball Joint Press
    • Tie Rod Puller



    This part replaces:

    • Reference Number K8695T
    • Reference Number K8708T
    • Reference Number K8710T
    • Dorman 520-221
    • Dorman 520-299
    • Hollander 511-01057AL
    • Hollander 511-01056AR

    Vehicle Fit

    • 1995-2001 Ford Explorer Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set
    • 2001-2002 Ford Explorer Sport Trac Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set
    • 1998-2002 Ford Ranger 2 Wheel Drive Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set for Models with Front Torsion Bar Suspension
    • 1998-2004 Ford Ranger 4 Wheel Drive Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set
    • 2001-2002 Mazda B2300 Truck 2 Wheel Drive Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set for Models with Front Torsion Bar Suspension
    • 1998-2001 Mazda B2500 Truck 2 Wheel Drive Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set for Models with Front Torsion Bar Suspension
    • 1998-2002 Mazda B3000 Truck 2 Wheel Drive Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set for Models with Front Torsion Bar Suspension
    • 1998-2002 Mazda B3000 Truck 4 Wheel Drive Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set
    • 1998-2002 Mazda B4000 Truck 2 Wheel Drive Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set for Models with Front Torsion Bar Suspension
    • 1998-2002 Mazda B4000 Truck 4 Wheel Drive Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set
    • 1997-2001 Mercury Mountaineer Suspension Kit with (2) Front Upper Control Arms with Ball Joints & (2) Front Lower Ball Joints 4 Piece Set
    Only 4 left in stock
    Part #: 1ASFK00443

    Ships Same Day for orders placed by 5 P.M. ET

    Free GROUND SHIPPING

    Check Shipping Rates

    We're here to help

    1A Auto Parts

    Customer Feedback

    Customer Feedback
    "Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
    - Dwuan M.
    Read More
    Free Shipping!
    OR
    CALL
    TOLL
    FREE

    888-844-3393

    hablamos Español:866-401-3393
    SHIPS SAME DAY M-F
    For Orders Placed By 5pm Est