Replaces

1995-1999 Chevy K2500 Truck Suspension Kit with HD Links (12 Piece) for Models with Stamped Steel Control Arms & for 6 Lug Wheels

  • New

These replacement suspension parts are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Suspension Kit includes:
    • (2) - FRONT UPPER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT LOWER Ball Joints (45.79 mm Diameter Press-In Type) - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT OUTER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT INNER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Sway Bar Links - LH (Driver Side) & RH (Passenger Side) Heavy Duty Design
    • (1) - FRONT Pitman Arm
    • (1) - FRONT Idler Arm
  • Replaces many dealer part numbers including: 12380415, 12383410, 15575901, 15617715, 15634385, 15634904, 15659518, 15687080, 26000150, 26028523, 26028525, 26051896, 26059030, 26059031, 26059033, 26059036
  • Direct replacements
  • Built to strict quality control standards
  • Fit 4WD (Four Wheel Drive) Models only
  • Fit models with Stamped Steel Control Arms only
    • Do NOT fit models with Forged Control Arms

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel (1:00 in the video)
    • Loosen the lug nuts.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
  2. Remove the front shield (1:15 in the video)
    • Use a 15 mm socket and ratchet.
    • Remove the four bolts.
  3. Remove the Idler Arm (1:25 in the video)
    • Remove the 24 mm bolt securing the idler arm to the steering linkage
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three other bolts securing the idler arm.
    • Use a Tie Rod Puller to pull apart the idler arm and the idler shaft.
  4. Install the new idler arm (4:34 in the video)
    • Assemble your new idler arm to your idler shaft, threading on the bushing and nut.
    • Bolt in the idler arm assembly into place, tightening up the three nuts.
    • Bolt in the end of the idler arm assembly to the steering gear.
    • Torque the nuts and bolts to 80 ft lbs.
    • Install the cotter pin.
    • Use a grease gun and fill the grease fitting.
  5. Reassembly (7:25 in the video)
    • Replace the shield with the four 15mm bolts.
    • Clip the air bag harness back in.
    • Put the wheel back on and lower the car
    • Using a star pattern torque the lug nuts to 120-140 ft lbs

Tools needed for replacement:

    Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 22mm Socket
  • 24mm Socket

  • Specialty Tools

  • Grease Gun
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Tie Rod Fork
  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench

How-to Video:

(08:13 min)

Tools List:

    Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 22mm Socket
  • 24mm Socket

  • Specialty Tools

  • Grease Gun
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Tie Rod Fork
  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench




Vehicle Fit

  • 1995-1999 Chevy K1500 Truck Suspension Kit with HD Links (12 Piece) for Models with Stamped Steel Control Arms
  • 1995-1999 Chevy K2500 Truck Suspension Kit with HD Links (12 Piece) for Models with Stamped Steel Control Arms & for 6 Lug Wheels
  • 1995-1999 Chevy Suburban C1500 Suspension Kit with HD Links (12 Piece) for Models with Stamped Steel Control Arms
  • 1995-1999 Chevy Suburban K1500 Suspension Kit with HD Links (12 Piece) for Models with Stamped Steel Control Arms
  • 1995-2000 Chevy Tahoe Suspension Kit with HD Links (12 Piece) for V8 5.7L Models with Stamped Steel Control Arms
  • 1995-1999 GMC K1500 Truck Suspension Kit with HD Links (12 Piece) for Models with Stamped Steel Control Arms
  • 1995-1999 GMC K2500 Truck Suspension Kit with HD Links (12 Piece) for Models with Stamped Steel Control Arms & for 6 Lug Wheels
  • 1995-1999 GMC Suburban 1500 Suspension Kit with HD Links (12 Piece) for Models with Stamped Steel Control Arms
  • 1995-2000 GMC Yukon Suspension Kit with HD Links (12 Piece) for V8 5.7L Models with Stamped Steel Control Arms
$115.95
Save 46%
List: $216.12 Save: $100.17
Part #: 1ASFK01099

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est