Replaces

1992-1995 Honda Civic Front Suspension Kit (12 Piece)

Part Details

  • Front / Rear Location: Front

  • New

These replacement front suspension parts are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • 12 Piece Front Suspension Kit includes:
    • (2) - FRONT UPPER Control Arms - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT LOWER Control Arms - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT LOWER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT INNER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT OUTER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Strut Bellows Kits - LH (Driver Side) & RH (Passenger Side)
  • Replaces many dealer part numbers including: 51220-S04-003, 51350-SR3-020, 51350-SR3-A02, 51350-ST7-010, 51360-ST7-010, 51392-SR3-024, 51450-SR0-A02, 51450-SR3-023, 51450-ST7-020, 51460-SR0-A02, 51460-SR3-023, 51460-ST7-020, 51810-SH3-004, 53010-SR3-010, 53540-S04-003, 53540-S04-013, 53560-S04-013, 51220S04003, 51350SR3020, 51350SR3A02, 51350ST7010, 51360ST7010, 51392SR3024, 51450SR0A02, 51450SR3023, 51450ST7020, 51460SR0A02, 51460SR3023, 51460ST7020, 51810SH3004, 53010SR3010, 53540S04003, 53540S04013, 53560S04013
  • Control arms include ball joints and bushings
  • Direct replacements
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacement. One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:40 in the video)
    • Loosen the lug nut covers
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Tie Rod (1:00 in the video)
    • Measure from the boot to the outer tie rod and record it
    • Loosen the 19mm nut on the tie rod with a 19mm wrench
    • Remove the cotter pin with pliers
    • Remove the castle nut with a 17mm socket
    • Hit the knuckle with a hammer
    • Twist the tie rod out
  3. Installing the New Tie Rod (2:13 in the video)
    • Twist on the new tie rod
    • Push the outer tie rod down into the knuckle
    • Replace the castle nut
    • Push the cotter pin into place and bend the ends in separate directions with pliers
    • Measure and double check the distance of the boot to the tie rod
    • Turn the tie rod joint with the 14mm wrench to adjust the distance
    • Replace and tighten the 19mm nut
  4. Reattaching the Wheel (3:15 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench

How-to Video:

(03:54 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench




Vehicle Fit

  • 1994-1997 Acura Integra Front Suspension Kit (12 Piece) (excluding Type R Models)
  • 1992-1995 Honda Civic Front Suspension Kit (12 Piece)
  • 1993-1997 Honda Civic Del Sol Front Suspension Kit (12 Piece)
$204.95
Part #: 1ASFK01238

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est