Replaces

1988-1992 GMC C2500 Truck 7200LB GVW for Models with 6 Lug Wheels 10 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (1) Pitman Arm & (1) Idler Arm

Part Details

  • Quantity: 10 Piece Set
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (2) Front Inner Tie Rods

This part replaces:

  • Reference Number K6293
  • Reference Number K6292
  • Reference Number ES2836RL
  • Reference Number ES2837RL
  • Reference Number K6335
  • Reference Number K6390

  • New

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Diagnosis (1:15)
    • To check to see if you have a bad pitman arm, jack up your car and secure it.
    • Move your wheel and if there is play in your pitman arm and joint.
  2. Remove the skid plate (1:55)
    • Unbolt the four 15 mm bolts.
    • Remove the kid plate and set aside.
  3. Prepare the steering box to access the pitman arm (2:10)
    • Unclip and move aside the plastic shield.
    • Spray the two fittings and the bolt with penetrating oil.
    • Loosen the power steering coupling bolt.
    • Use a fitting wrench to remove the two fittings and an 11 mm socket and ratchet and extension to remove the bolt.
    • Have a helper hold the steering wheel for you while you do this to make it easier.
    • Use a pry bar to move the steering shaft from the steering box.
  4. Remove the steering box and pitman arm (4:35)
    • Use a 21 mm bolt to remove the bolt mounting the pitman arm.
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three bolts securing the steering box and remove the steering box completely to remove the pitman arm.
    • Put the steering box and pit man arm in an oil pan.
    • Use an impact wrench or a large breaker bar as well as a pitman arm puller to remove the pitman arm from the steering arm.
  5. For reinstallation please see part 2 (8:10)

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Assistant
  • Hammer
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 34mm Socket
  • 15mm Socket
  • 21mm Socket
  • 11mm Socket

  • Specialty Tools

  • Pitman Arm Puller

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:32 min)

Tools List:

    General Tools

  • Jack Stands
  • Assistant
  • Hammer
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 34mm Socket
  • 15mm Socket
  • 21mm Socket
  • 11mm Socket

  • Specialty Tools

  • Pitman Arm Puller

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • Reference Number K6293
  • Reference Number K6292
  • Reference Number ES2836RL
  • Reference Number ES2837RL
  • Reference Number K6335
  • Reference Number K6390

Vehicle Fit

  • 1988-1992 Chevy C1500 Truck 10 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (1) Pitman Arm & (1) Idler Arm
  • 1988-1992 Chevy C2500 Truck 7200LB GVW for Models with 6 Lug Wheels 10 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (1) Pitman Arm & (1) Idler Arm
  • 1992 Chevy Suburban C1500 10 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (1) Pitman Arm & (1) Idler Arm
  • 1988-1992 GMC C1500 Truck 10 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (1) Pitman Arm & (1) Idler Arm
  • 1988-1992 GMC C2500 Truck 7200LB GVW for Models with 6 Lug Wheels 10 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (1) Pitman Arm & (1) Idler Arm
  • 1992 GMC Suburban C1500 10 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (1) Pitman Arm & (1) Idler Arm
$ 91.95
Save 22%
List: $117.48 Save: $25.53
Part #: 1ASFK01169

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est