Replaces

1999-2004 Chevy S10 Pickup 4WD Front Suspension Kit

Part Details

  • Location: Front
  • Transmission/Drivetrain Type: 4WD

This part replaces:

  • OE # 26054968
  • OE # 26048561
  • OE # 12471301
  • OE # 17980954
  • OE # 22156908
  • OE # 82604-85610
  • OE # 26033093
  • OE # 12471300
  • OE # 7830667
  • OE # 7833124
  • OE # 7839709
  • OE # 7837636
  • OE # 26054932
  • OE # 26029949

  • New

These replacement suspension parts are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • FRONT Suspension Kit includes:
    • (2) - FRONT OUTER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side) * Offset
    • (2) - FRONT INNER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Tie Rod Adjusting Sleeves - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT LOWER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT UPPER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Sway Bar Links (Upgraded Heavy Duty Design) - LH (Driver Side) & RH (Passenger Side)
    • (1) - FRONT Pitman Arm
    • (1) - FRONT Idler Arm
  • Parts are new, not remanufactured or refurbished
  • Direct replacements
  • Built to strict quality control standards
  • Fits 4WD (Four Wheel Drive) Models only

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Clean up the top of the upper control arm (1:00 in the video)
  2. Install the ball joint (1:07 in the video)
    • Line up the boot on the ball joint and put the ball joint in place and put the nut on it.
    • Bolt the ball joint in with the four nuts and bolts.
    • Torque them to 25 ft lbs
  3. Install the tie rod. (2:18 in the video)
    • Put the tie rod in place
    • Bolt it in at 55 ft lbs.
    • Put in the cotter pin, hammer it through and bend it with a pair of pliers.
    • Fill the tie rod end with grease.
  4. Install the hub (3:35 in the video)
    • Put the O ring into the hub.
    • Mount the hub and thread the ABS harness into place.
    • Bolt the hub into place and make sure the shield is in the correct position.
    • Use a star like pattern when bolting in the hub and torque the bolts to 65 ft lbs.
    • Clip and bolt the ABS harness in and connect it.
  5. Install the brakes (6:05 in the video)
    • Mount the rotor and caliper
    • Bolt the caliper bolts in and torque to 50-60 ft lbs.
    • Use a rubber mallet to help get the caliper on.
  6. Install the hub nut and wheel. (7:00 in the video)
    • Before putting the wheel on, put the hub nut on and tighten but do not torque.
    • Put the wheel back on and lower the car.
    • Torque the hub nut to 90 ft lbs.
    • Using a star pattern, torque the wheel lug nuts to 75 ft lbs.
    • Put the cap and lug nut covers on.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket
  • 20mm Socket
  • 21mm Socket
  • 22mm Socket
  • 24mm Socket
  • 35mm Socket

  • Specialty Tools

  • Chisel
  • Floor Jack
  • Grease Gun
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Wrenches - Metric

  • 13mm Wrench
  • 18mm Wrench

How-to Video:

(09:04 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket
  • 20mm Socket
  • 21mm Socket
  • 22mm Socket
  • 24mm Socket
  • 35mm Socket

  • Specialty Tools

  • Chisel
  • Floor Jack
  • Grease Gun
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Wrenches - Metric

  • 13mm Wrench
  • 18mm Wrench



This part replaces:

  • OE # 26054968
  • OE # 26048561
  • OE # 12471301
  • OE # 17980954
  • OE # 22156908
  • OE # 82604-85610
  • OE # 26033093
  • OE # 12471300
  • OE # 7830667
  • OE # 7833124
  • OE # 7839709
  • OE # 7837636
  • OE # 26054932
  • OE # 26029949

Vehicle Fit

  • 1998 Chevy Blazer S10 4WD Front Suspension Kit for Models with Offset Tie Rod
  • 1999-2005 Chevy Blazer S10 4WD Front Suspension Kit
  • 1998 Chevy S10 Pickup 4WD Front Suspension Kit for Models with Offset Tie Rod
  • 1999-2004 Chevy S10 Pickup 4WD Front Suspension Kit
  • 1998 GMC Jimmy S-15 4WD Front Suspension Kit for Models with Offset Tie Rod
  • 1999-2001 GMC Jimmy S-15 4WD Front Suspension Kit
  • 1999-2004 GMC S-15 Sonoma 4WD Front Suspension Kit
  • 1998 Isuzu Hombre 4WD Front Suspension Kit for Models with Offset Tie Rod
  • 1999-2000 Isuzu Hombre 4WD Front Suspension Kit
  • 1999-2001 Olds Bravada 4WD Front Suspension Kit
$113.95
Save 84%
List: $722.68 Save: $608.73
Part #: 1ASFK00995

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est