Replaces

2001-2004 GMC Sierra 2500 Front Suspension Kit

Part Details

  • Location: Front

  • New

These replacement suspension parts are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • FRONT Suspension Kit includes:
    • (2) - FRONT UPPER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT LOWER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT INNER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT OUTER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Sway Bar End Links - LH (Driver Side) & RH (Passenger Side)
    • (1) - FRONT Pitman Arm (3 Groove design)
    • (1) - FRONT Idler Arm
  • Replaces many dealer part numbers including: 12479051, 15891516, 15840266, 10385580, 15295861, 26059210, 12475477
  • Direct replacements
  • Built to strict quality control standards
  • Fits models with 3 Groove Design Pitman Arm
  • Do not fit models with Rack & Pinion Steering

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacement. One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:47 in the video)
    • Pry off the wheel cover by hand
    • Loosen the lug nut covers with a 21mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Outer Tie Rod (1:19 in the video)
    • Turn the brake rotor by hand or turn the steering wheel to turn the rotor
    • Loosen the tie rod with an adjustable wrench
    • Straighten out the castle nut pin with pliers
    • Remove the pin
    • Remove the 21mm castle nut from the ball joint
    • Strike the wheel knuckle with a hammer to loosen the tie rod end
    • Pull the tie rod out of the wheel knuckle
    • Measure the distance from the base of the inner tie rod to the end of the outer tie rod
    • Note that measurement
    • Twist off the outer tie rod
  3. Installing the Outer Tie Rod (2:39 in the video)
    • Twist the outer tie rod onto the inner tie rod
    • Measure the distance from the base of the inner tie rod to the end of the outer tie rod
    • This should be the same as the measurement from Step 2
    • Push the ball joint into the steering knuckle
    • Fasten the castle nut onto the ball joint
    • Push the pin through the castle nut
    • Bend the pin into place with pliers
    • Tighten the tie rod with an adjustable wrench
  4. Reattaching the Wheel (4:09 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 21mm socket
    • Push on the wheel cover

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 7mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Hammer
  • Jack Stands

How-to Video:

(04:55 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 7mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Hammer
  • Jack Stands




Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 Front Suspension Kit
  • 2001-2003 Chevy Silverado 1500 HD Front Suspension Kit
  • 2005-2007 Chevy Silverado 1500 HD Front Suspension Kit
  • 2001-2004 Chevy Silverado 2500 Front Suspension Kit
  • 2001-2006 Chevy Silverado 2500 HD Front Suspension Kit
  • 2007 Chevy Silverado 2500 HD Classic Front Suspension Kit
  • 2001-2006 Chevy Silverado 3500 Front Suspension Kit
  • 2007 Chevy Silverado 3500 Classic Front Suspension Kit
  • 2001-2006 Chevy Suburban 2500 Front Suspension Kit
  • 2001-2003 GMC Sierra 1500 HD Front Suspension Kit
  • 2005-2007 GMC Sierra 1500 HD Front Suspension Kit
  • 2001-2004 GMC Sierra 2500 Front Suspension Kit
  • 2001-2006 GMC Sierra 2500 HD Front Suspension Kit
  • 2007 GMC Sierra 2500 HD Classic Front Suspension Kit
  • 2001-2006 GMC Sierra 3500 Front Suspension Kit
  • 2007 GMC Sierra 3500 Classic Front Suspension Kit
  • 2001-2006 GMC Yukon XL 2500 Front Suspension Kit
  • 2003-2007 Hummer H2 Front Suspension Kit
$124.95
Part #: 1ASFK00497

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est