Replaces

Subaru Baja Outback Fog / Driving Light Driver Side - 1ALFL00154

Part Details

  • Location: Driver Side
  • Light Options: Round

This part replaces:

  • OE # 84501AE11A
  • PARTSLINK SU2592101
  • HOLLANDER 116-59217L

  • New

This replacement round fog driving light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side)
    • Bumper Mounted
  • Direct replacement ROUND Fog Light
  • Replaces dealer part number: 84501-AE11A, 84501AE11A
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. Servicing the Fog Light Bulbs (0:45 in the video)
    • Pry off the plastic clip with a flat blade screwdriver
    • Pull back the fog light panel
    • Twist the bulb counterclockwise and out
    • Disconnect the bulb from the wiring connector
    • Connect the new bulb to the wiring connector
    • Twist the bulb clockwise into the fog light
  2. Removing the Fog Light (2:11 in the video)
    • Remove the plastic 12mm nuts from the fog light
    • Apply penetrating oil to the two 10mm bolts in the fog light
    • Remove the two 10mm bolts
    • Disconnect the fog light wiring harness
    • Pull the fog light out from the front of the bumper
  3. Installing the New Fog Light (3:49 in the video)
    • Push the new fog light into place
    • Put on the plastic nuts
    • Insert the two 10mm bolts into the fog light
    • Connect the fog light wiring harness
    • Push the fog light cover into place
    • Insert the plastic clip into the fog light cover

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 12mm Socket

  • Wrenches - Metric

  • 10mm Wrench
  • 12mm Wrench

How-to Video:

(05:26 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 12mm Socket

  • Wrenches - Metric

  • 10mm Wrench
  • 12mm Wrench



This part replaces:

  • OE # 84501AE11A
  • PARTSLINK SU2592101
  • HOLLANDER 116-59217L

Vehicle Fit

  • 2003-2005 Subaru Baja Round Fog / Driving Light Driver Side
  • 2000-2004 Subaru Outback Round Fog / Driving Light Driver Side
$50.95
Save 52%
List: $106.47 Save: $55.52
Only 1 left in stock
Part #: 1ALFL00154

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est