Replaces

2000-2013 Chevy Impala Front Upper Strut Mount with Bearing Pair

Part Details

  • Location: Upper
  • Location: Front

  • New

These replacement upper strut mounts are just what you need to get your vehicle riding great again!

Specifications:
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT UPPER
  • Includes mounts and bearings
  • Replaces dealer part numbers: 22179331, 22167000, 908554
  • Direct replacements
  • Built to strict quality control standards
These strut mounts are great replacements and offer good savings over the dealer units.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:53 in the video)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Front Strut (1:23 in the video)
    • Spray the lower and higher strut bolts with penetrating oil
    • Remove the two of the upper 15mm strut bolts
    • Remove the two 21mm nuts from the bottom of the strut and knuckle
    • Hammer the bottom of the strut to loosen the bolts
    • Remove the nuts and hammer the bolts out
    • Pull the wheel knuckle forward and push the strut back
    • Remove the two of the upper 15mm strut bolt
    • Remove the rear shock strut
  3. Removing the Top Strut Mount (3:05 in the video)
    • Spray the top bolt on the strut with penetrating oil
    • Place the spring compressors on either side of the spring
    • Tighten each back and forth a little while alternating sides
    • Remove the nut at the top of the strut with a strut socket and T47 Torx bit
    • Pull the mount plate from the top of the strut free
    • Remove the spring
    • Pull the boot up and off
  4. Assembling the Front Strut (5:01 in the video)
    • Replace the boot
    • Insert the spring into its notch on the strut
    • Push the plate and mount onto the strut
    • Push down on the strut and insert a 47 Torx bolt
    • Loosen each of the compressors bit by bit while alternating sides
    • Repeat until the spring compressors pull free
  5. Inserting the Front Strut (6:31 in the video)
    • Insert the strut into place
    • Replace the upper 15mm strut bolts by hand
    • Push down on the knuckle and place the strut behind it
    • Push the strut onto the knuckle
    • Insert the 21mm bolts into the bottom of the strut and knuckle
    • Hammer the 21mm bolts in and tighten them
    • Torque the 21mm bolts to 130 ft/lbs
  6. Reattaching the Wheel (8:24 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Tighten the three 15mm bolts at the top of the strut
    • Tighten the lug nuts to 30 ft/lbs
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    Allen Wrenches

  • 6 mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Strut Spring Compression Tool

  • Torx Drivers & Sockets

  • T47 Torx Socket

  • Wrenches - Metric

  • 18mm Wrench

How-to Video:

(10:11 min)

Tools List:

    Allen Wrenches

  • 6 mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Strut Spring Compression Tool

  • Torx Drivers & Sockets

  • T47 Torx Socket

  • Wrenches - Metric

  • 18mm Wrench




Vehicle Fit

  • 2005-2008 Buick Allure Front Upper Strut Mount with Bearing Pair
  • 1997-2005 Buick Century Front Upper Strut Mount with Bearing Pair
  • 2005-2008 Buick LaCrosse Front Upper Strut Mount with Bearing Pair
  • 1997-2004 Buick Regal Front Upper Strut Mount with Bearing Pair
  • 2002-2007 Buick Rendezvous Front Upper Strut Mount with Bearing Pair
  • 2005-2007 Buick Terraza Front Upper Strut Mount with Bearing Pair
  • 2000-2013 Chevy Impala Front Upper Strut Mount with Bearing Pair
  • 2000-2007 Chevy Monte Carlo Front Upper Strut Mount with Bearing Pair
  • 2005-2008 Chevy Uplander Front Upper Strut Mount with Bearing Pair
  • 1997-2005 Chevy Venture Front Upper Strut Mount with Bearing Pair
  • 1998-2002 Olds Intrigue Front Upper Strut Mount with Bearing Pair
  • 1997-2004 Olds Silhouette Front Upper Strut Mount with Bearing Pair
  • 2001-2005 Pontiac Aztek Front Upper Strut Mount with Bearing Pair
  • 1997-2008 Pontiac Grand Prix Front Upper Strut Mount with Bearing Pair
  • 1999-2005 Pontiac Montana Front Upper Strut Mount with Bearing Pair
  • 1997-1998 Pontiac Trans Sport Front Upper Strut Mount with Bearing Pair
  • 2005-2007 Saturn Relay Front Upper Strut Mount with Bearing Pair
$55.45
Save 88%
List: $453.52 Save: $398.07
Part #: 1ASFK00305

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est