1993-2002 Toyota Corolla Rear Strut Assembly Passenger Side (Monroe Quick-Strut) Monroe 171953MNSTS00044-431537
- Product Line: Monroe Quick-Strut
This part replaces:
- Monroe 171953
Monroe Quick-Strut®: 171953
This is a new MONROE strut and spring assembly. We recommend replacing struts in pairs and performing an alignment after replacement.
Quantity: (1) Quick Strut
Side: RH (Passenger Side)
Vehicle Type: All Models
Engine Size: All
Quick and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the first time. Enhances the handling, safety and performance of your vehicle.
Includes the following preassembled components:
- Upper Mount
- Upper Spring Isolator
- Upper Spring Seat
- Coil Spring
- Boot Kit
- Lower Spring Isolator
- Premium Strut
The revolutionary Monroe Quick-Strut unit is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement upper mount, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics.
In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.
To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.
Warranty Note: Tenneco Inc. warrants qualifying Monroe® products against defects and wear-out when used on private passenger cars and light trucks under normal operating conditions for as long as such original purchaser owns the vehicle on which they were originally installed.
Tenneco's obligation under this warranty is limited to replacement of the worn-out or defective product in accordance with this warranty. Cost of removal and installation are not included, and any incidental and consequential damages are excluded under this warranty, regardless of when the failure occurs. This warranty has no cash value. This warranty does not apply to products which have been modified, improperly applied or installed on vehicles used for commercial or racing purposes. Qualifying Products are Monroe OESpectrum Shocks and Struts, Monroe Reflex Shocks and Struts, Monroe Sensa-Trac Shocks and Struts, Monroe Quick-Strut replacement assemblies, Monroe Gas-Magnum Shocks
- 1998-2002 Chevy Prizm Rear Strut Assembly Passenger Side (Monroe Quick-Strut) Monroe 171953
- 1993-1997 Geo Prizm Rear Strut Assembly Passenger Side (Monroe Quick-Strut) Monroe 171953
- 1993-2002 Toyota Corolla Rear Strut Assembly Passenger Side (Monroe Quick-Strut) Monroe 171953
Part #: MNSTS00044
Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
Brand #: 171953