Replaces

2006-2011 Mercury Mariner Hybrid Front Strut & Spring Assembly Pair (Monroe Quick-Strut) Monroe 171593, 171594

Part Details

  • Front / Rear Location: Front
  • Quantity: Pair
  • Product Line: Monroe Quick-Strut

This part replaces:

  • Monroe 171593, 171594

  • New

Monroe Quick-Strut® Pair 171593 / 171594

These are new MONROE strut and spring assemblies. We recommend performing an alignment after replacement.

Specifications:

  • Quantity: (2) Quick Struts

  • Side: Both LH (Driver Side) & RH (Passenger Side)

  • Location: FRONT

  • Vehicle Type: All

  • Engine Size: All

  • Built to strict quality control standards:

Quick and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the first time. Enhances the handling, safety and performance of your vehicle.

Each includes the following preassembled components:

  1. Upper Mount
  2. Upper Spring Isolator
  3. Upper Spring Seat
  4. Boot Kit
  5. Lower Spring Isolator
  6. Premium Strut

The revolutionary Monroe Quick-Strut unit is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement upper mount, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics.

In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Warranty Note: Tenneco Inc. warrants qualifying Monroe products against defects and wear-out when used on private passenger cars and light trucks under normal operating conditions for as long as such original purchaser owns the vehicle on which they were originally installed. Tenneco's obligation under this warranty is limited to replacement of the worn-out or defective product in accordance with this warranty. Cost of removal and installation are not included, and any incidental and consequential damages are excluded under this warranty, regardless of when the failure occurs. This warranty has no cash value. This warranty does not apply to products which have been modified, improperly applied or installed on vehicles used for commercial or racing purposes. Qualifying Products are Monroe OESpectrum Shocks and Struts, Monroe Reflex Shocks and Struts, Monroe Sensa-Trac Shocks and Struts, Monroe Quick-Strut replacement assemblies, Monroe Gas-Magnum Shocks

  1. Remove the top of the shock (1:02)
    • Pop the hood and apply penetrating oil to the top four bolts.
    • Use a 14 mm socket and ratchet to remove the nuts.
  2. Remove the wheel (1:35)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and the tire
  3. Remove the bottom part of the strut (1:52)
    • Apply penetrating oil to your 10 mm brake line bracket bolt, 14mm Stabilizer link bolt and two 18 mm strut bolts.
    • Unbolt the brake line bracket bolt, and then use your 5 mm Allen wrench to stabilize the bolt and work the nut loose with your 14 mm wrench or socket.
    • Continue to loosen, apply penetrating oil, tighten, loosen, apply penetrating oil and repeat until you work it loose.
    • Use a breaker bar or pipe and ratchet to remove the 18 mm bolts.
  4. Install the new strut (7:00)
    • Position your strut into place and thread your 6 nuts on.
    • Torque the top four 14mm bolts to 35 ft lbs.
    • Tighten and torque the bottom two bolts to 85 ft lbs.
    • Bolt your stabilizer link back in as well as your brake line bracket.
    • Use your 14 mm socket, ratchet and 5 mm Allen wrench to install the stabilizer link.
    • The brake line bracket can be reinstalled with a 10 mm socket and ratchet.
  5. Put the wheel back on (9:50)
    • Replace the wheel and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 12mm Socket
  • 13mm Socket
  • 11mm Socket
  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 17mm Socket
  • 10mm Socket
  • 16mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 15mm Wrench
  • 17mm Wrench
  • 13mm Wrench
  • 12mm Wrench
  • 19mm Wrench
  • 10mm Wrench
  • 18mm Wrench
  • 14mm Wrench
  • 11mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:29 min)

Tools List:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 12mm Socket
  • 13mm Socket
  • 11mm Socket
  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 17mm Socket
  • 10mm Socket
  • 16mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 15mm Wrench
  • 17mm Wrench
  • 13mm Wrench
  • 12mm Wrench
  • 19mm Wrench
  • 10mm Wrench
  • 18mm Wrench
  • 14mm Wrench
  • 11mm Wrench



This part replaces:

  • Monroe 171593, 171594

Vehicle Fit

  • 2001-2011 Ford Escape Front Strut & Spring Assembly Pair (Monroe Quick-Strut) Monroe 171593, 171594
  • 2005-2011 Ford Escape Hybrid Front Strut & Spring Assembly Pair (Monroe Quick-Strut) Monroe 171593, 171594
  • 2001-2006 Mazda Tribute Front Strut & Spring Assembly Pair (Monroe Quick-Strut) Monroe 171593, 171594
  • 2008-2011 Mazda Tribute Front Strut & Spring Assembly Pair (Monroe Quick-Strut) Monroe 171593, 171594
  • 2005-2011 Mercury Mariner Front Strut & Spring Assembly Pair (Monroe Quick-Strut) Monroe 171593, 171594
  • 2006-2011 Mercury Mariner Hybrid Front Strut & Spring Assembly Pair (Monroe Quick-Strut) Monroe 171593, 171594
Only 3 left in stock
Part #: MNSSP00123

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MONROE
Brand #: 171593, 171594

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est