Replaces

1995-1999 GMC K1500 Truck 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for Models with Stamped Steel Lower Control Arms

Part Details

  • Quantity: 12 Piece Set
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (2) Front Inner Tie Rods

  • New

Specifications:

  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel (1:00)
    • Loosen the lug nuts.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
  2. Remove the front shield (1:15)
    • Use a 15 mm socket and ratchet.
    • Remove the four bolts.
  3. Remove the Idler Arm (1:25)
    • Remove the 24 mm bolt securing the idler arm to the steering linkage
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three other bolts securing the idler arm.
    • Use a Tie Rod Puller to pull apart the idler arm and the idler shaft.
  4. Install the new idler arm (4:34)
    • Assemble your new idler arm to your idler shaft, threading on the bushing and nut.
    • Bolt in the idler arm assembly into place, tightening up the three nuts.
    • Bolt in the end of the idler arm assembly to the steering gear.
    • Torque the nuts and bolts to 80 ft lbs.
    • Install the cotter pin.
    • Use a grease gun and fill the grease fitting.
  5. Reassembly (7:25)
    • Replace the shield with the four 15mm bolts.
    • Clip the air bag harness back in.
    • Put the wheel back on and lower the car
    • Using a star pattern torque the lug nuts to 120-140 ft lbs

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 22mm Socket
  • 24mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
how do u tell if control arms are forged or stamped?
angel k on Nov 4, 2015
BEST ANSWER: Hello and thank you for your inquiry,

You should be able to see if there are seals where the steel gets stamped together, almost like tracing the sides of the control arms. If you are unsure you should be able to call the dealer with your VIN number and they should be able to tell you. Thank you and have a great day!

How-to Video:

(08:13 min)

Tools List:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 22mm Socket
  • 24mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench




Vehicle Fit

  • 1995-1999 Chevy K1500 Truck 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for Models with Stamped Steel Lower Control Arms
  • 1995-1999 Chevy K2500 Truck 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for 6 Lug Wheels for Models with Stamped Steel Lower Control Arms
  • 1995-1999 Chevy Suburban C1500 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for Models with Stamped Steel Lower Control Arms
  • 1995-1999 Chevy Suburban K1500 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for Models with Stamped Steel Lower Control Arms
  • 1995-2000 Chevy Tahoe 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for V8 5.7L Stamped Steel Lower Control Arms
  • 1995-1999 GMC K1500 Truck 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for Models with Stamped Steel Lower Control Arms
  • 1995-1999 GMC K2500 Truck 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for 6 Lug Wheels for Models with Stamped Steel Lower Control Arms
  • 1995-1999 GMC Suburban C1500 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for Models with Stamped Steel Lower Control Arms
  • 1995-1999 GMC Suburban K1500 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for Models with Stamped Steel Lower Control Arms
  • 1995-2000 GMC Yukon 12 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Front Sway Bar Links (1) Pitman Arm (1) Idler Arm for V8 5.7L Stamped Steel Lower Control Arms
$ 89.95
Save 58%
List: $216.12 Save: $126.17
Part #: 1ASFK01099

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est