Replaces

2005-2009 Saab 9-7X Front Shock & Spring Assembly Pair (Monroe Econo-Matic)

Part Details

  • Quantity: Pair

This part replaces:

  • Monroe 181341

  • New

Monroe Econo-Matic® Shock Assemblies: 181341

These are new MONROE shock and spring assemblies. We recommend replacing shocks in pairs and performing an alignment after replacement.

Specifications:

  • Quantity: (2) Shock & Spring Assemblies

  • Side: LH (Driver Side) or RH (Passenger Side)

  • Location: FRONT

  • Vehicle Type: All

  • Engine Size: All

  • Drivetrain: All (AWD, 2WD, 4WD)

Quick and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the first time. Enhances the handling, safety and performance of your vehicle.

Includes the following preassembled components:

  1. Upper Mount
  2. Upper Spring Isolator
  3. Upper Spring Seat
  4. Coil Spring
  5. Boot Kit
  6. Lower Spring Isolator
  7. Premium Strut

The Monroe Econo-Matic Strut is a complete, ready-to-install replacement strut assembly. Each unit features a pre-assembled replacement upper mount, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and strut. This fully integrated design reduces installation time, eliminates the need for a spring compressor and helps ensure a complete repair. The Econo-matic strut features nitrogen gas charging, velocity proportional valving and all-weather fluid to deliver improved comfort.

In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Quick and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the first time. Enhances the handling, safety and performance of your vehicle.

Includes the following preassembled components:

  • Bearing Plate
  • Upper Spring Isolator
  • Upper Spring Seat
  • Coil Spring
  • Boot Kit
  • Lower Spring Isolator
  • Premium Strut

The Monroe Econo-Matic Strut comes with a 1 Year Warranty and is a complete, ready-to-install replacement strut assembly. Each unit features a pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and strut. This fully integrated design reduces installation time, eliminates the need for a spring compressor and helps ensure a complete repair. The Econo-matic strut features nitrogen gas charging, velocity proportional valving and all-weather fluid to deliver improved comfort.

In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.

Note: Tenneco's obligation under this warranty is limited to replacement of the worn-out or defective product in accordance with this warranty. Cost of removal and installation are not included, and any incidental and consequential damages are excluded under this warranty, regardless of when the failure occurs. This warranty has no cash value. This warranty does not apply to products which have been modified, improperly applied or installed on vehicles used for commercial or racing purposes.


Vehicle Fit

  • 2004-2007 Buick Rainier Front Shock & Spring Assembly Pair (Monroe Econo-Matic)
  • 2002-2009 Chevy Trailblazer Front Shock & Spring Assembly Pair (Monroe Econo-Matic)
  • 2002-2006 Chevy Trailblazer EXT Front Shock & Spring Assembly Pair (Monroe Econo-Matic)
  • 2002-2009 GMC Envoy Front Shock & Spring Assembly Pair (Monroe Econo-Matic)
  • 2002-2006 GMC Envoy XL Front Shock & Spring Assembly Pair (Monroe Econo-Matic)
  • 2004-2005 GMC Envoy XUV Front Shock & Spring Assembly Pair (Monroe Econo-Matic)
  • 2003-2008 Isuzu Ascender Front Shock & Spring Assembly Pair (Monroe Econo-Matic)
  • 2002-2004 Olds Bravada Front Shock & Spring Assembly Pair (Monroe Econo-Matic)
  • 2005-2009 Saab 9-7X Front Shock & Spring Assembly Pair (Monroe Econo-Matic)
$217.45
Only 4 left in stock
Part #: MNSSP00183

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MONROE
Brand #: 181341

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est