Replaces

2007-2013 Chevy Tahoe Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)

Part Details

  • Front / Rear Location: Front
  • Quantity: Pair

This part replaces:

  • Monroe 139105

  • New

Monroe Quick-Strut® Pair 139105

Specifications:

  • Quantity: (2) Quick Struts Shock Assemblies

  • Side: Both LH (Driver Side) & RH (Passenger Side)

  • Location: FRONT

  • Vehicle Type: Excluding Adjustable Suspension (Air or Electronic)

  • Engine Size: All

Quick and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the first time. Enhances the handling, safety and performance of your vehicle.

Each includes the following preassembled components :

  1. Upper Mount
  2. Upper Spring Isolator
  3. Upper Spring Seat
  4. Boot Kit
  5. Lower Spring Isolator
  6. Premium Strut

The revolutionary Monroe Quick-Strut unit is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement upper mount, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics.

In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Warranty Note: Tenneco Inc. warrants qualifying Monroe products against defects and wear-out when used on private passenger cars and light trucks under normal operating conditions for as long as such original purchaser owns the vehicle on which they were originally installed. Tenneco's obligation under this warranty is limited to replacement of the worn-out or defective product in accordance with this warranty. Cost of removal and installation are not included, and any incidental and consequential damages are excluded under this warranty, regardless of when the failure occurs. This warranty has no cash value. This warranty does not apply to products which have been modified, improperly applied or installed on vehicles used for commercial or racing purposes. Qualifying Products are Monroe OESpectrum Shocks and Struts, Monroe Reflex Shocks and Struts, Monroe Sensa-Trac Shocks and Struts, Monroe Quick-Strut replacement assemblies, Monroe Gas-Magnum Shocks

  1. Removing the Wheel (0:59 in the video)
    • Remove the wire clip from the top of the strut
    • Remove the three 18mm nuts from the top of the strut
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Stabilizer Link (2:02 in the video)
    • Turn the wheel by hand
    • Spray the top of the stabilizer link with rust penetrant
    • Hold the stabilizer link stud with a 15mm wrench
    • Remove the lower nut from the stabilizer link with a 15mm wrench
    • Pull off the stabilizer link
  3. Removing the Shock Strut (2:38 in the video)
    • Remove a 15mm socket from the lower shock strut bolts
    • Press down on the strut
    • Remove the strut
    • Push off the two clips with a flat blade screwdriver from the old strut
  4. Installing the New Strut (3:38 in the video)
    • Insert the 18mm nuts to the top of the strut by hand
    • Thread the 15mm bolts to the lower part of the strut
    • Replace the old two clips to the new strut
    • Tighten the 15mm bolts to the lower part of the strut
    • Torque the 15mm bolts between 70 and 75 foot-pounds
  5. Reinstalling the Stabilizer Link (4:58 in the video)
    • Push the stabilizer link into place
    • Start the 15mm nuts by hand
    • Hold the upper stabilizer link stud with a 15mm wrench
    • Fasten the lower nut onto the stabilizer link with a 15mm wrench
  6. Reattaching the Wheel (5:13 in the video)
    • Slide the wheel into place
    • Start the 22mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the 18mm nuts to the top of the strut
    • Torque the 18mm nuts between 75 and 85 foot-pounds
    • Reinsert the wire clip

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 22mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Jack Stands

How-to Video:

(06:04 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 22mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Jack Stands



This part replaces:

  • Monroe 139105

Vehicle Fit

  • 2007-2013 Cadillac Escalade Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2007-2013 Cadillac Escalade ESV Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2007-2013 Cadillac Escalade EXT Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2009-2013 Cadillac Escalade Hybrid Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2007-2013 Chevy Avalanche 1500 Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2007 Chevy Silverado 1500 New Body Style Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2008-2013 Chevy Silverado 1500 Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2009-2013 Chevy Silverado Hybrid Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2007-2013 Chevy Suburban 1500 Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2007-2013 Chevy Tahoe Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2007 GMC Sierra 1500 New Body Style Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2008-2013 GMC Sierra 1500 Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2007 GMC Sierra Denali 1500 New Body Style Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2008-2013 GMC Sierra Denali 1500 Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2009-2013 GMC Sierra Hybrid Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2007-2009 GMC Yukon Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
  • 2007-2009 GMC Yukon XL 1500 Front Shock & Spring Assembly Pair (excluding Electronic Suspension) (Monroe Quick-Strut)
$350.45
Part #: MNSSP00110

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MONROE
Brand #: 139105

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est