Replaces

1992-1999 GMC Suburban 4WD Rear Shock Absorber Driver or Passenger Side (Monro-Matic Plus)

Part Details

  • Brands: Monro-Matic Plus
  • Location: Rear
  • Location: Driver or Passenger Side

This part replaces:

  • MONROE 32265

  • New

Monroe Monro-Matic Plus® Rear Shock Absorber: 32265

QTY: (1)

Fits: Fits LH (Driver Side) or RH (Passenger Side)

Location: REAR

Fits: All Models (As Listed per Applications)

Exclusions: Does not fit Models with Electronic Suspension or Automatic Ride Control

Monroe Monro-Matic Shock with Innovative Technology:

The Monro-Matic Plus® shock absorbers are nitrogen gas charged and feature velocity sensitive valving and all weather fluid, which offers trucks improved comfort at an economical price.

The result: enhanced control with uncompromised ride comfort.

  1. All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  2. Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  3. Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  4. Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  5. 2" Reserve Tube: More fluid for more consistent performance.
  6. 1-3/8" Bore: Lower operating pressure than standard 1" bore units.
  7. 5/8" Piston Rod: Heavy-duty nitrocarburized rod* for long service life.
  8. Special Seal: "Self-lubricating" fluid seal designed to retain gas without excessive wear or friction.
* On non-dust shield units only.

2 Year Warranty

This item is backed by a 2 Year  Manufacturers Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Warranty Note: Tenneco Inc. warrants qualifying Monroe® products against defects and wear-out when used on private passenger cars and light trucks under normal operating conditions for as long as such original purchaser owns the vehicle on which they were originally installed.

Tenneco's obligation under this warranty is limited to replacement of the worn-out or defective product in accordance with this warranty. Cost of removal and installation are not included, and any incidental and consequential damages are excluded under this warranty, regardless of when the failure occurs. This warranty has no cash value. This warranty does not apply to products which have been modified, improperly applied or installed on vehicles used for commercial or racing purposes.

  1. Removing the Rear Shock
    • Raise the Vehicle with a Floor Jack
    • Secure the Vehicle on Jack Stands
    • Use a 21mm wrench to hold the lower shock bolt
    • Remove the lower shock nut with a 21mm socket and ratchet
    • Remove one of the two 14mm bolts from the top of the shock
    • Hold the shock as you remove the other 14mm bolt
    • Pull down the shock
  2. Installing the New Strut
    • Thread one 14mm bolt through the top of the new shock
    • Put the shock into place
    • Tighten the first 14mm bolt preliminarily
    • Start the second 14mm bolt and tighten it preliminarily
    • Tighten the two 14mm bolts
    • Push the lower end of the shock into place
    • Push the 21mm bolt through the lower end of the shock
    • Start the 21mm nut by hand
    • Use a 21mm wrench to hold the lower shock bolt
    • Tighten the 21mm nut to between 75-80 foot-pounds of torque
    • Lower the vehicle to the ground
    • Repeat this procedure on the other side

How-to Video:

(03:20 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 21mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands



This part replaces:

  • MONROE 32265

Vehicle Fit

  • 1999-2000 Cadillac Escalade Rear Shock Absorber Driver or Passenger Side (Monro-Matic Plus)
  • 1996-2013 Chevy Express 2500 Van Rear Shock Absorber Driver or Passenger Side (Monro-Matic Plus)
  • 1996-2013 Chevy Express 3500 Van Rear Shock Absorber Driver or Passenger Side (excluding Cutaway Chassis) (Monro-Matic Plus)
  • 1992-1999 Chevy Suburban K1500 4WD Rear Shock Absorber Driver or Passenger Side (excluding Z71 Models) (Monro-Matic Plus)
  • 1992-1999 Chevy Suburban K2500 4WD Rear Shock Absorber Driver or Passenger Side (excluding Z71 Models) (Monro-Matic Plus)
  • 1995-1999 Chevy Tahoe 4 Door 4WD Rear Shock Absorber Driver or Passenger Side (Monro-Matic Plus)
  • 2000 Chevy Tahoe Rear Shock Absorber for V8 5.7L Models Driver or Passenger Side (Monro-Matic Plus)
  • 1996-2013 GMC Savana 2500 Van Rear Shock Absorber Driver or Passenger Side (Monro-Matic Plus)
  • 1996-2013 GMC Savana 3500 Van Rear Shock Absorber Driver or Passenger Side (excluding Cutaway Chassis) (Monro-Matic Plus)
  • 1992-1999 GMC Suburban 4WD Rear Shock Absorber Driver or Passenger Side (Monro-Matic Plus)
  • 1995-1999 GMC Yukon 4 Door 4WD Rear Shock Absorber Driver or Passenger Side (Monro-Matic Plus)
  • 2000 GMC Yukon Rear Shock Absorber for V8 5.7L Models Driver or Passenger Side (Monro-Matic Plus)
$45.95
Part #: MNSHA00007

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MONROE
Brand #: 32265

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est