Replaces

2004-2007 Infiniti QX56 Front Shock Absorber Driver or Passenger Side

Part Details

  • Location: Front

This part replaces:

  • OE # E6110-9FE4B, 56110-7S126

  • New

This replacement shock is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either the LH (Driver Side) or RH (Passenger Side) FRONT
  • Shock only
    • Does not include spring or mounts
  • Direct replacement
  • Built to strict quality control standards

We recommend replacing shocks in pairs and performing an alignment after replacement. This will ensure proper tracking and even tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:44 in the video)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Strut (1:08 in the video)
    • Hold the 19mm bolt at the bottom of the strut with a 19mm wrench
    • Remove the 19mm nut with a ratchet and a piece of pipe for leverage
    • Knock the bolt out with a punch and a hammer
    • Remove the three 14mm nuts from the top of the strut
    • Use a hammer to knock the strut out of place
    • Pull the strut down and out
  3. Installing the New Strut (2:29 in the video)
    • Push the new strut up into place
    • Insert the three 14mm nuts onto the top of the strut
    • Hammer the lower end of the strut into place
    • Push down on the wheel knuckle as you push the 19mm bolt into place
    • Tighten the 19mm nut onto the 19mm nut
    • Tighten the lower nut to 100 foot-pounds of torque
    • Tighten the upper nuts to 25 foot-pounds of torque
  4. Reattaching the Wheel (3:45 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Center Punch
  • Floor Jack
  • Hammer
  • Jack Stands

  • Wrenches - Metric

  • 19mm Wrench

How-to Video:

(04:29 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Center Punch
  • Floor Jack
  • Hammer
  • Jack Stands

  • Wrenches - Metric

  • 19mm Wrench



This part replaces:

  • OE # E6110-9FE4B, 56110-7S126

Vehicle Fit

  • 2004-2007 Infiniti QX56 Front Shock Absorber Driver or Passenger Side
  • 2005-2009 Nissan Armada Front Shock Absorber Driver or Passenger Side
  • 2004 Nissan Pathfinder Armada Front Shock Absorber Driver or Passenger Side
  • 2004-2010 Nissan Titan Front Shock Absorber Driver or Passenger Side
$50.95
Only 4 left in stock
Part #: 1ASHA00057

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est