Replaces

1988-2000 GMC K2500 Truck 4WD Front Shock Absorber Driver or Passenger Side (excluding 8600 GVW) (Monroe Sensa-Trac)

Part Details

  • Front / Rear Location: Front
  • Side Location: Driver or Passenger Side

This part replaces:

  • Monroe 37130

  • New

Monroe® Sensa-Trac® Front Shock Absorber: 37130

QTY: (1)

Side: Either LH (Driver Side) or RH (Passenger Side)

Location: FRONT

Vehicle Type: 4WD (Four Wheel Drive) Models only

Premium Shock with Innovative Technology

The Monroe® Sensa-Trac® passenger car shock absorber with PSD (position sensitive damping) and the Safe Tech™ system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle.

These features allow the Monroe Sensa-Trac passenger car shock absorber to adjust more rapidly to changing road and weight conditions than any other available shock absorber.

The result: enhanced control with uncompromised ride comfort.

  1. All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  2. Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  3. 1-3/16" Bore: Larger bore than most shocks to provide more efficient and consistent control.
  4. Fluon Banded Piston: Works with the existing groove tube technology to enhance responsiveness to changing road conditions.
  5. Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
  6. Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  7. 1/2" Diameter Piston Rod: Nitrocarburized rod* for long service life.
  8. Special Seal: "Self-lubricating" fluid seal designed to retain gas without excessive wear or friction.
* On non-dust shield units only.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Rear Shock (0:49)
    • Raise the Vehicle with a Floor Jack
    • Secure the Vehicle on Jack Stands
    • Use a 21mm wrench to hold the lower shock bolt
    • Remove the lower shock nut with a 21mm socket and ratchet
    • Remove one of the two 14mm bolts from the top of the shock
    • Hold the shock as you remove the other 14mm bolt
    • Pull down the shock
  2. Installing the New Strut (1:48)
    • Thread one 14mm bolt through the top of the new shock
    • Put the shock into place
    • Tighten the first 14mm bolt preliminarily
    • Start the second 14mm bolt and tighten it preliminarily
    • Tighten the two 14mm bolts
    • Push the lower end of the shock into place
    • Push the 21mm bolt through the lower end of the shock
    • Start the 21mm nut by hand
    • Use a 21mm wrench to hold the lower shock bolt
    • Tighten the 21mm nut to between 75-80 foot-pounds of torque
    • Lower the vehicle to the ground
    • Repeat this procedure on the other side

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 21mm Socket

How-to Video:

(03:20 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 21mm Socket



This part replaces:

  • Monroe 37130

Vehicle Fit

  • 1999-2000 Cadillac Escalade 4WD Front Shock Absorber Driver or Passenger Side (Monroe Sensa-Trac)
  • 1992-1994 Chevy Blazer Full Size 4WD Front Shock Absorber Driver or Passenger Side (excluding Z71 Models) (Monroe Sensa-Trac)
  • 1988-1999 Chevy K1500 Truck 4WD Front Shock Absorber Driver or Passenger Side (excluding Z71 Models) (Monroe Sensa-Trac)
  • 1988-2000 Chevy K2500 Truck 4WD Front Shock Absorber Driver or Passenger Side (excluding 8600 GVW) (Monroe Sensa-Trac)
  • 1992-1999 Chevy Suburban K1500 4WD Front Shock Absorber Driver or Passenger Side (excluding Z71 Models) (Monroe Sensa-Trac)
  • 1992-1999 Chevy Suburban K2500 4WD Front Shock Absorber Driver or Passenger Side (excluding Z71 Models) (Monroe Sensa-Trac)
  • 1995-2000 Chevy Tahoe 4WD Front Shock Absorber Driver or Passenger Side (Monroe Sensa-Trac)
  • 1988-1999 GMC K1500 Truck 4WD Front Shock Absorber Driver or Passenger Side (excluding Z71 Models) (Monroe Sensa-Trac)
  • 1988-2000 GMC K2500 Truck 4WD Front Shock Absorber Driver or Passenger Side (excluding 8600 GVW) (Monroe Sensa-Trac)
  • 1992-1999 GMC Suburban K1500 Front Shock Absorber Driver or Passenger Side (excluding Z71 Models) (Monroe Sensa-Trac)
  • 1992-1999 GMC Suburban K2500 Front Shock Absorber Driver or Passenger Side (excluding Z71 Models) (Monroe Sensa-Trac)
  • 1992-2000 GMC Yukon 4WD Front Shock Absorber Driver or Passenger Side (Monroe Sensa-Trac)
$52.95
Part #: 1ASHA00015

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MONROE
Brand #: 37130

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est