Replaces

2006-2010 Jeep Commander Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)

Part Details

  • Brands: Gates

This part replaces:

  • OE # 53030958AE
  • GATES 39120

  • New

Gates (39120) Serpentine Belt Drive Tensioner with Pulley

This Gates Serpentine Belt Drive Tensioner with Pulley is just what you need to keep your vehicle in good running order.

You can count on Gates to supply premium quality tensioners and pulleys you can depend on. Gates ensures that every tensioner and pulley they manufacture is built to rigid tolerances and specifications that guarantee OE fit, form and function.

Specifications:

  • Brand new, not rebuilt or remanufactured
  • Includes pulley
  • Replaces dealer part number: 53030958AE
  • Direct replacement
  • Built to strict quality control standards
  • 76 mm diameter pulley

If you are hearing a whirring noise from the front of your engine or if your belt often screeches you may be in need of a new belt tensioner. This part commonly wears out between 60,000 and 70,000 Miles. If it fails suddenly it can leave you stranded.

This tensioner makes a great replacement and has good cost savings over a dealer unit.

2 Year Warranty

This item is backed by a 2 Year  Manufacturers Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Purchase with Confidence. Gates is committed to quality! Limited Warranty Merchandise is warranted to be free from defects in material or workmanship for 18 months from the date of delivery to Purchaser. The Gates Corporation will, at its option, replace or repair any merchandise proved defective in material or workmanship, or both, during the warranty period. This shall be the sole remedy for breach of warranty. All other warranties, express or implied, including, but not limited to, warranties of merhchantability or fitness for a particular purpose, hereby are expressly disclaimed. liability for consequential, incidental, special, exemplary and indirect damages, including, but not limited to, lost profits, hereby are expressly excluded, regardless of whether they were reasonably foreseeable, or whether seller had knowledge that they could occur. Exclusion of Warranty The warranty shall be void to the extent that any of the following occurs: (a) improper installation of the Products into vehicles; or (b) improper usage by Purchaser ; or (c) induction of defect by other products; or (d) mishandling of the Products or other abuse; or (e) improper matching with other applications; or (f) collision, engine overheating or oil starvation, product contamination, including, but not limited to, with oil or antifreeze; or (g) the Products are used for racing or competition; or (h) any use not recommended in writing by Gates.

  1. Remove the serpentine belt
    • Pop the hood.
    • Locate your serpentine belt routing diagram
    • Use your 15 mm socket and ratchet to release tension from the serpentine belt tensioner.
    • Remove the serpentine belt.
    • Observe your serpentine belt.
    • Replace your serpentine belt if you find any cracks on the smooth side, or you noticed any snapped cord poking out of the belt, fraying or excessive wear.
  2. Remove the serpentine belt tensioner
    • Use your 13 mm socket and ratchet to unbolt the serpentine belt tensioner.
    • You may need to employ a breaker bar to get the bolt loose.
    • Remove the old serpentine belt tensioner pulley and set it aside.
  3. Install the new serpentine belt tensioner
    • Mount your tensioner pulley.
    • Use your 13 mm socket and ratchet to secure the new serpentine belt tensioner from 1A Auto.
  4. Install the serpentine belt
    • Procure your serpentine belt diagram
    • Start looping the serpentine belt around the pulleys.
    • With your 15 mm socket and ratchet, release the tension from the serpentine belt to loop the serpentine belt over the last pulley.

How-to Video:

(04:10 min)

Tools List:

    Ratchets & Related

  • Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket



This part replaces:

  • OE # 53030958AE
  • GATES 39120

Vehicle Fit

  • 2007-2009 Chrysler Aspen Serpentine Belt Tensioner with Pullies for V8 4.7L (Gates)
  • 2000-2003 Dodge Dakota Serpentine Belt Tensioner with Pullies 76mm OD for V8 4.7L (Gates)
  • 2004-2010 Dodge Dakota Serpentine Belt Tensioner with Pullies for V8 4.7L (Gates)
  • 2004-2010 Dodge Dakota Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)
  • 2000-2003 Dodge Durango Serpentine Belt Tensioner with Pullies 76mm OD for V8 4.7L (Gates)
  • 2004-2009 Dodge Durango Serpentine Belt Tensioner with Pullies for V8 4.7L (Gates)
  • 2004-2009 Dodge Durango Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)
  • 2007-2011 Dodge Nitro Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)
  • 2002-2003 Dodge Ram 1500 Truck Serpentine Belt Tensioner with Pullies 76mm OD for V6 3.7L (Gates)
  • 2002-2003 Dodge Ram 1500 Truck Serpentine Belt Tensioner with Pullies 76mm OD for V8 4.7L (Gates)
  • 2004-2010 Dodge Ram 1500 Truck Serpentine Belt Tensioner with Pullies for V8 4.7L (Gates)
  • 2004-2010 Dodge Ram 1500 Truck Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)
  • 2006-2009 Jeep Commander Serpentine Belt Tensioner with Pullies for V8 4.7L (Gates)
  • 2006-2010 Jeep Commander Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)
  • 2004-2009 Jeep Grand Cherokee Serpentine Belt Tensioner with Pullies for V8 4.7L (Gates)
  • 2005-2010 Jeep Grand Cherokee Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)
  • 2002-2003 Jeep Liberty Serpentine Belt Tensioner with Pullies 76mm OD for V6 3.7L (Gates)
  • 2004-2012 Jeep Liberty Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)
  • 2006-2007 Mitsubishi Raider Serpentine Belt Tensioner with Pullies for V8 4.7L (Gates)
  • 2006-2008 Mitsubishi Raider Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)
  • 2011-2013 Ram 1500 Truck Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)
  • 2011-2013 Ram 1500 Truck Serpentine Belt Tensioner with Pullies for V8 4.7L (Gates)
  • 2011 Ram Dakota Serpentine Belt Tensioner with Pullies for V6 3.7L (Gates)
  • 2011 Ram Dakota Serpentine Belt Tensioner with Pullies for V8 4.7L (Gates)
$69.45
Save 33%
List: $104.00 Save: $34.55
Part #: GAEBT00003

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
GATES
Brand #: 39120

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est