Replaces

2003-2004 Mercury Marauder Serpentine Belt Tensioner with Pulley for V8 4.6L

This part replaces:

  • OE # 2W7Z 6B209 AA

  • New

This replacement serpentine belt tensioner is just what you need to get your vehicle in good working order again! If you are hearing a whirring noise from the front of your engine or if your belt often screeches you may be in need of a new belt tensioner. This part commonly wears out between 60,000 and 70,000 Miles. If it fails suddenly it can leave you stranded.

Specifications:

  • Brand New Serpentine Belt Tensioner
  • Includes pulley
  • Replaces dealer part numbers: 2W7E-6B209-AA, 2W7Z-6B209-AA, XR3E-6B209-AA, XR3E-6B209-AB, XR3Z-6B209-AA, 2W7E6B209AA, 2W7Z6B209AA, XR3E6B209AA, XR3E6B209AB, XR3Z6B209AA
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with V8 4.6L Engine only

This tensioner makes a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Serpentine Belt
    • Familiarize yourself with the belt routing diagram
    • Attach a 3/8 inch drive ratchet to the serpentine belt tensioner
    • Pull the tensioner clockwise to loosen the belt
    • Pull the belt off
    • Loosen the tensioner
  2. Removing the Serpentine Belt Tensioner
    • Remove the 10mm bolt from the serpentine belt tensioner
    • Pry the tensioner off with a flat blade screwdriver
  3. Installing the New Serpentine Belt Tensioner
    • Thread a 10mm bolt through the new tensioner
    • Push the new tensioner into place
    • Tighten the 10mm bolt
  4. Reinstalling the New Serpentine Belt
    • Loop the belt around the A/C pulley
    • Bring it around the tensioner pulley
    • Bring it around the water pump pulley
    • Bring it around the crank pulley
    • Bring it around the power steering pulley
    • Bring it around the idler pulley
    • Check that the belt is routed correctly
    • Attach the 3/8 inch drive ratchet to the tensioner
    • Turn the tensioner clockwise
    • Pull the belt onto the alternator
    • Release the tensioner

How-to Video:

(05:17 min)

Tools List:

    Ratchets & Related

  • 3/8 inch drive ratchet
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)



This part replaces:

  • OE # 2W7Z 6B209 AA

Vehicle Fit

  • 2000-2010 Ford Crown Victoria Serpentine Belt Tensioner with Pulley for V8 4.6L
  • 2000-2002 Ford Mustang Serpentine Belt Tensioner with Pulley for V8 4.6L
  • 2000-2004 Ford Mustang GT Serpentine Belt Tensioner with Pulley for V8 4.6L
  • 2001 Ford Mustang Cobra Serpentine Belt Tensioner with Pulley for V8 4.6L
  • 2003-2004 Ford Mustang Mach 1 Serpentine Belt Tensioner with Pulley for V8 4.6L
  • 2000-2010 Lincoln Town Car Serpentine Belt Tensioner with Pulley for V8 4.6L
  • 2000-2010 Mercury Grand Marquis Serpentine Belt Tensioner with Pulley for V8 4.6L
  • 2003-2004 Mercury Marauder Serpentine Belt Tensioner with Pulley for V8 4.6L
$45.45
Save 42%
List: $78.67 Save: $33.22
Part #: 1AEBT00077

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est