Replaces

2004-2006 Chevy Malibu Serpentine Belt Tensioner with Pulley for V6 3.5L

This part replaces:

  • DORMAN 419-104
  • OE # 12563083

  • New

This replacement serpentine belt tensioner is just what you need to get your vehicle in good working order again! If you are hearing a whirring noise from the front of your engine or if your belt often screeches you may be in need of a new belt tensioner. This part commonly wears out between 60,000 and 70,000 Miles. If it fails suddenly it can leave you stranded.

Specifications:

  • Direct replacement
  • Replaces dealer part number: 12563083
  • Brand new not rebuilt
  • Built to strict quality control standards

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Air Intake Hose
    • Loosen the air intake hose clamp with a flat blade screwdriver
    • Pull the smaller tube off the intake hose
    • Remove the 10mm bolt from the intake hose
    • Remove the two T25 Torx screws from the air filter box cover
    • Disconnect the wiring harness from the intake hose
  2. Removing the Air Filter Box
    • Remove the two 10mm bolts from the air filter box
    • Pull the air box up and out
  3. Removing the Serpentine Belt
    • Attach a 3/8 inch drive ratchet to the serpentine belt tensioner
    • Pull the tensioner counterclockwise to loosen the belt
    • Pull the belt off the pulleys and up and out
  4. Removing the Serpentine Belt Tensioner
    • Remove the 15mm bolt from the tensioner
    • Pull off the tensioner
  5. Installing the New Serpentine Belt Tensioner
    • Start the 15mm bolt into the tensioner
    • Put the new tensioner into place using the locating tab
    • Tighten the 15mm bolt to 35 foot-pounds of torque
  6. Reinstalling the Serpentine Belt
    • Route the serpentine belt around the pulleys as it was routed before, leaving it off the idler pulley Attach a 3/8 inch drive ratchet to the serpentine belt tensioner
    • Pull the tensioner counterclockwise to loosen the belt
    • Pull the belt onto the idler pulley
    • Release the tensioner
  7. Reinstalling the Air Box
    • Put the air box into place using the locating tabs
    • Insert the two 10mm bolts into the air box
  8. Reinstalling the Air Intake Hose
    • Put the intake hose into place
    • Connect the air intake wiring harness
    • Put the safety plug into the intake hose
    • Push the air box cover into place
    • Insert the two T25 screws into the air box
    • Insert the 10mm bolt into the intake hose bracket
    • Connect the smaller tube to the intake hose
    • Tighten the intake hose clamp with a flat blade screwdriver

How-to Video:

(08:24 min)

Tools List:

    Ratchets & Related

  • 3/8 inch drive ratchet
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)

  • Torx Drivers & Sockets

  • T25 Torx Driver



This part replaces:

  • DORMAN 419-104
  • OE # 12563083

Vehicle Fit

  • 2002-2007 Buick Rendezvous Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 2005-2006 Buick Terraza Serpentine Belt Tensioner with Pulley for V6 3.5L
  • 2005-2009 Chevy Equinox Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 1997-2003 Chevy Malibu Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 2004-2006 Chevy Malibu Serpentine Belt Tensioner with Pulley for V6 3.5L
  • 2004-2006 Chevy Malibu Maxx Serpentine Belt Tensioner with Pulley for V6 3.5L
  • 2005-2006 Chevy Uplander Serpentine Belt Tensioner with Pulley for V6 3.5L
  • 1999-2005 Chevy Venture Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 1999-2004 Olds Alero Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 1997-1999 Olds Cutlass Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1999-2004 Olds Silhouette Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 2001-2005 Pontiac Aztek Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 2005-2006 Pontiac G6 Serpentine Belt Tensioner with Pulley for V6 3.5L
  • 1999-2005 Pontiac Grand Am Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 1999-2005 Pontiac Montana Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 2005-2006 Pontiac Montana SV6 Serpentine Belt Tensioner with Pulley for V6 3.5L
  • 2006-2009 Pontiac Torrent Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 2005-2006 Saturn Relay Serpentine Belt Tensioner with Pulley for V6 3.5L
$41.45
Save 52%
List: $86.04 Save: $44.59
Part #: 1AEBT00014

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est