Replaces

1995-1999 Chevy Lumina Serpentine Belt Tensioner with Pulley for V6 3.1L

This part replaces:

  • OE # 12563084
  • DORMAN 419-101

  • New

This replacement serpentine belt tensioner is just what you need to get your vehicle in good working order again! If you are hearing a whirring noise from the front of your engine or if your belt often screeches you may be in need of a new belt tensioner. This part commonly wears out between 60,000 and 70,000 Miles. If it fails suddenly it can leave you stranded.

Specifications:

  • Direct replacement
  • Brand new not rebuilt

To ensure fit please match the 8th digit of your VIN number to the VIN code in the title. Your vehicles VIN number can be found in the lower left corner of the windshield or on your registration.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the serpentine belt (1:00 in the video)
    • Locate your serpentine belt routing diagram
    • If you can’t find it, draw one out or use a camera or mobile device to take a bunch of pictures for reference.
    • Use your 3/8ths drive ratchet to release tension from your serpentine belt tensioner
    • Remove your serpentine belt.
  2. Remove your serpentine belt tensioner (2:59 in the video)
    • Use your 15 mm socket and ratchet to unbolt and remove your serpentine belt tensioner
  3. Install your new serpentine belt tensioner (3:55 in the video)
    • Thread the bolt down into place and line up the pin in the serpentine belt tensioner.
    • Use your socket and ratchet to tighten the pulley down.
    • Torque it to about 30-35 ft lbs.
  4. Install your serpentine belt (5:21 in the video)
    • Inspect your serpentine belt for cracks and flaws.
    • Use your reference material to rout your serpentine belt.
    • Use your 3/8ths drive ratchet to release tension from the tensioner to loop the belt over the last pulley.

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit

  • Sockets - Metric

  • 15mm Socket

How-to Video:

(07:55 min)

Tools List:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit

  • Sockets - Metric

  • 15mm Socket



This part replaces:

  • OE # 12563084
  • DORMAN 419-101

Vehicle Fit

  • 1987-1989 Buick Century Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1994-1999 Buick Century Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 2000-2005 Buick Century Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1988-1989 Buick Regal Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1989-1993 Buick Regal Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1994-1996 Buick Regal Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1994-1997 Buick Skylark Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1987-1988 Cadillac Cimarron Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1987-1989 Chevy Beretta Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1990-1993 Chevy Beretta Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1994-1996 Chevy Beretta Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1995-1996 Chevy Beretta Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1987-1989 Chevy Cavalier Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1990-1994 Chevy Cavalier Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1987-1989 Chevy Celebrity Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1990 Chevy Celebrity Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1987-1989 Chevy Corsica Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1990-1993 Chevy Corsica Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1994-1996 Chevy Corsica Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 2000-2005 Chevy Impala Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 1990-1994 Chevy Lumina Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1995-1999 Chevy Lumina Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 2000-2001 Chevy Lumina Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1990-1995 Chevy Lumina APV Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1996 Chevy Lumina APV Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 1995-1999 Chevy Monte Carlo Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 2000-2005 Chevy Monte Carlo Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 1997-1998 Chevy Venture Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 1994-1998 Olds Achieva Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1987-1989 Olds Ciera Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1994-1996 Olds Ciera Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1987-1989 Olds Cutlass Ciera Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1994-1996 Olds Cutlass Ciera Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1987 Olds Cutlass Cruiser Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1994-1996 Olds Cutlass Cruiser Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1988-1989 Olds Cutlass Supreme Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1989-1993 Olds Cutlass Supreme Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1993-1997 Olds Cutlass Supreme Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1987 Olds Firenza Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1990-1994 Olds Silhouette Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1996-1998 Olds Silhouette Serpentine Belt Tensioner with Pulley for V6 3.4L
  • 1987-1989 Pontiac 6000 Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1988-1991 Pontiac 6000 Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1994-1998 Pontiac Grand Am Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1988-1989 Pontiac Grand Prix Serpentine Belt Tensioner with Pulley for V6 2.8L
  • 1989-1993 Pontiac Grand Prix Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1989-1990 Pontiac Grand Prix Serpentine Belt Tensioner with Pulley for V6 3.1L Turbo
  • 1994-2000 Pontiac Grand Prix Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 2000-2003 Pontiac Grand Prix Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1991-1994 Pontiac Sunbird Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1990-1995 Pontiac Trans Sport Serpentine Belt Tensioner with Pulley for V6 3.1L
  • 1996-1998 Pontiac Trans Sport Serpentine Belt Tensioner with Pulley for V6 3.4L
$46.45
Save 48%
List: $89.27 Save: $42.82
Part #: 1AEBT00004

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est