Replaces

1993-1997 Dodge Intrepid Radiator Overflow Bottle

This part replaces:

  • DORMAN 603-301
  • OE # 4592067

  • New

Our coolant bottles are some of the highest quality replacements on the market!

This Chrysler Dodge Eagle radiator coolant overflow bottle has been designed to replace the original Mopar design.

Specifications

  • Direct replacement for originals that are cracked or broken
  • Strengthened and redesigned in the vulnerable areas of failure
  • Plastic construction
  • Replaces dealer part number: 4592067
  • Does not include low fluid sensor (reuse your old one if your car has one)

Now you can buy a high quality coolant reservoir that is built to strict quality control standards. REPLACE your broken or cracked one now with this great fitting, Chrysler Dodge Eagle Radiator Overflow Bottle.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Air Intake Hose (0:53)
    • Loosen the intake hose clamps with a flat blade screwdriver
    • Pull off the intake hose
  2. Removing the Coolant Bottle (1:12)
    • Pry off the coolant bottle plug with a flat blade screwdriver and needle nose pliers
    • Remove the two 10mm bolts from the coolant bottle
    • Loosen the upper coolant hose clamp with slip joint pliers
    • Twist off the upper coolant hose
    • Twist off the overflow hose
    • Loosen the lower coolant hose clamp with slip joint pliers
    • Twist off the lower coolant hose
    • Lift out the coolant bottle
  3. Installing the Coolant Bottle (4:03)
    • Put the coolant bottle into place
    • Insert the two 10mm bolts into the coolant bottle
    • Twist the tubes onto the coolant bottle
    • Tighten the hose clamps with slip joint pliers
    • Push the plug into the coolant bottle
    • Tighten the two 10mm bolts
  4. Adding Coolant (5:32)
    • Twist off the radiator cap
    • Add coolant until the coolant level is about an inch and a half below the cap
    • Twist on the radiator cap
    • Fill the coolant bottle
  5. Installing the Intake Hose (5:45)
    • Push the intake hose into place
    • Tighten the intake hose clamps

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:41 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • DORMAN 603-301
  • OE # 4592067

Vehicle Fit

  • 1993-1997 Chrysler Concorde Radiator Overflow Bottle
  • 1994-1997 Chrysler LHS Radiator Overflow Bottle
  • 1994-1996 Chrysler New Yorker Radiator Overflow Bottle
  • 1993-1997 Dodge Intrepid Radiator Overflow Bottle
  • 1993-1997 Eagle Vision Radiator Overflow Bottle
$70.45
Save 13%
List: $80.60 Save: $10.15
Only 2 left in stock
Part #: 1AROB00005

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est