1999-2001 Chrysler LHS Radiator Cooling Fan Assembly

This part replaces:

  • DORMAN 620-005
  • HOLLANDER 674-367
  • OE # 4596402AA/5066160/5066161/5066
  • PARTSLINK CH3115103

  • New

Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market! This radiator fan assembly is a complete, ready to bolt on, direct replacement part.


  • New, not rebuilt, electric motor
  • Geometrically designed plastic blades for optimal circulation and uniform balance
  • Plastic shroud designed to ensure structural integrity and endurance for maximum performance
  • Performance tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug for trouble free installation
  • Fits all engine sizes

Now you can buy a high quality cooling fan assembly that is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the headlights
    • Pop the hood and secure it.
    • Use a 7 mm socket to remove the bolts on the top of the headlight assembly.
    • Pull the headlight up and out.
    • Unplug the wiring harness.
  2. Remove the panel covering the front of the engine bay.
    • Remove the push clips and 10 mm and 13 mm bolts securing the radiator mount panel.
    • If you’d like, you can disconnect the hood release cable, otherwise just tuck the panel aside out of the way.
    • Take care not to crimp the cable.
  3. Remove the radiator fan
    • Pull out the locking tab and unplug the wiring connector from the radiator.
    • Remove the four 10 mm bolts anchoring the radiator fan.
    • Pull the fan up and out of the vehicle.
  4. Install the new fan
    • Transfer the clip at the bottom of the fan to the new fan.
    • Clip the new fan down and into place.
    • Secure by bolting it down with your 10 mm socket and ratchet.
  5. Replace the panel covering the front of the engine bay
    • Put the cover back into place.
    • Take care with the hood release cable.
    • Replace all the 10 and 13 mm bolts and push clips.
  6. Install the headlights
    • Plug in the bulbs and wiring harnesses
    • Fit the headlights into place and secure with the two 7 mm bolts on each.

How-to Video:

(13:48 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 7mm Wrench

This part replaces:

  • DORMAN 620-005
  • HOLLANDER 674-367
  • OE # 4596402AA/5066160/5066161/5066
  • PARTSLINK CH3115103

Vehicle Fit

  • 1999-2004 Chrysler 300M Radiator Cooling Fan Assembly
  • 1998-2004 Chrysler Concorde Radiator Cooling Fan Assembly
  • 1999-2001 Chrysler LHS Radiator Cooling Fan Assembly
  • 1998-2004 Dodge Intrepid Radiator Cooling Fan Assembly
Part #: 1ARFA00003

- Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est