Replaces

O2 Oxygen Sensor - 1AEOS00017

This part replaces:

  • STANDARD MOTOR PRODUCTS SG1846

  • New

Specifications:

  • Direct Fit
    • Correct Connector No cutting or splicing
    • Correct wire length 
  • Upstream or Downstream Sensor
    • as listed per application
  • 4 wire configuration
  • Replaces dealer part numbers: 36531P8EA01, 36531 P8E A01, 36532P2EA01, 36532 P2E A01, 36532P30A01, 36532 P30 A01, 36541PR7A51, 36541 PR7 A51
  • Built and tested to strict quality control standards

Note: For clarification purposes:

  • Upstream location is between the catalytic converter and the engine
  • Downstream location is between the catalytic converter and the tailpipe

If you have a bad O2 sensor causing your vehicle to run poorly or fail an emission test then this is the part for you.

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Oxygen (O2) Sensor (0:45)
    • Raise and secure the vehicle
    • Disconnect the oxygen sensor wiring harness
    • Remove the O2 sensor with an O2 sensor socket and a ratchet
    • If the O2 sensor will not come off normally, cut the wires with wire cutters and remove it with a 7/8 inch socket and ratchet
  2. Installing the New O2 Sensor (1:52)
    • Twist the new O2 sensor into place
    • Tighten the O2 sensor with an O2 sensor socket and a ratchet
    • Connect the O2 sensor wiring harness

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - SAE

  • 7/8 Inch Socket

  • Specialty Tools

  • O2 Sensor Socket

How-to Video:

(02:47 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - SAE

  • 7/8 Inch Socket

  • Specialty Tools

  • O2 Sensor Socket



This part replaces:

  • STANDARD MOTOR PRODUCTS SG1846

Vehicle Fit

  • 1991-1995 Acura Legend O2 Oxygen Sensor Upstream
  • 1991-1999 Acura NSX Upstream O2 Oxygen Sensor
  • 2000-2005 Acura NSX Downstream Front Bank O2 Oxygen Sensor for V6 3.2L
  • 2000-2005 Acura NSX Downstream Front Bank O2 Oxygen Sensor for V6 3.0L
  • 1999 Acura TL Upstream O2 Oxygen Sensor for V6 3.2L
  • 1996 Honda Civic Downstream O2 Oxygen Sensor for L4 1.6L
  • 1997 Honda Civic EX Downstream O2 Oxygen Sensor for L4 1.6L Manual Transmission
  • 1997-2000 Honda Civic HX LX DX VP CX Downstream O2 Oxygen Sensor for L4 1.6L Manual Transmission
  • 1996 Honda Civic Del Sol Downstream O2 Oxygen Sensor for L4 1.6L
  • 1997 Honda Civic Del Sol Downstream O2 Oxygen Sensor for L4 1.6L Manual Transmission
$45.45
Save 83%
List: $259.80 Save: $214.35
Part #: 1AEOS00017

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est