Replaces

2009-2014 Nissan Cube Brake Pad & Rotor Kit Front Semi-Metallic

Part Details

  • Front / Rear Location: Front
  • Brake Pad Friction Material: Semi-Metallic

  • New

This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Semi-Metallic Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Come as a PAIR
  • Replaces dealer part numbers: 40206EM10A, 40206 EM10A, 40206ET00A, 40206 ET00A, 40206ET00C, 40206 ET00C, 40206ET01C, 40206 ET01C
  • Fits 4 Stud Wheels
  • Vented
  • 11.02" (280mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of dealer brakes.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (1:05)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Inspecting the Brakes (1:24)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges or rust on both sides of the rotor
  3. Removing the Brake Pads and Caliper (2:06)
    • Remove the two 14mm bolts from the brake caliper
    • Pry the brake pads with a flat blade screwdriver to push back the piston
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Check that the caliper slides move fluidly
    • If necessary, remove the brake caliper slides
    • Clean the slides with a wire brush
    • Apply grease to the slides
    • Push the slides into the caliper bracket
  4. Removing the Brake Rotor and Caliper Bracket (3:50)
    • Remove the two 19mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, apply penetrating oil to the studs
    • Thread one lug nut by hand
    • Strike the rear of the rotor with a hammer
  5. Installing the New Brake Rotor and Caliper Bracket (5:41)
    • Clean the hub and studs with a wire brush
    • Clean the rotor with mineral spirits or brake parts cleaner
    • Slide the rotor on
    • Thread one lug nut by hand to hold the rotor in place
    • Clean the brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the two 19mm bolts by hand
    • Tighten the bolts to 98 foot-pounds of torque
  6. Installing the New Brake Pads and Caliper (6:55)
    • Apply white grease to the outside and edges of the new brake pads
    • Install the new outside brake pads into the bracket with the wear tab on the lower side
    • Use a large C-clamp or channel lock pliers to push the pistons back
    • Put the caliper on, pushing the caliper slides in
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 25 foot-pounds
  7. Reattaching the Wheel (9:23)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  8. Testing the Brakes (9:45)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Mineral Spirits
  • Rust Penetrant
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers
  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:14 min)

Tools List:

    General Tools

  • Hammer
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Mineral Spirits
  • Rust Penetrant
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers
  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket




Vehicle Fit

  • 2009-2014 Nissan Cube Brake Pad & Rotor Kit Front Semi-Metallic
  • 2007-2012 Nissan Sentra Front Brake Pad & Rotor Kit for Models with 4 Lug Wheels Semi-Metallic
  • 2007 Nissan Versa Front Brake Pad & Rotor Kit for L4 1.8L Models Semi-Metallic
  • 2008 Nissan Versa Front Brake Pad & Rotor Kit for L4 1.8L Models (Without ABS Brakes) Semi-Metallic
  • 2009-2012 Nissan Versa Front Brake Pad & Rotor Kit for L4 1.8L Models Semi-Metallic
$69.95
Part #: 1ABFS00830

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est