Replaces

2002-2006 Nissan Altima Front Inner Tie Rod

Part Details

  • Location: Inner
  • Front / Rear Location: Front

This part replaces:

  • OE # 485217Y000
  • OE # 485218J000

  • New

This Inner Tie Rod End is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits either the LH (Driver Side) or RH (Passenger Side) FRONT INNER
  • Replaces dealer part numbers: 485217Y000, 485218J000, 48521-7Y000, 48521-8J000
  • Direct replacement
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel (0:53)
    • Loosen the lug nuts with your 19 mm socket and breaker bar
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
  2. Remove control arm (1:13)
    • Remove the cotter pin in the control arm joint.
    • Hit the nut with penetrating oil.
    • Use a 22 mm wrench to remove the nut.
    • Remove the first of two 19 mm bolts on the other end of the control arm.
    • In order to get the second 19 mm bolt, you have to remove the engine bracket.
    • Jack up the suspension to relieve tension from the control arm.
    • Unbolt the two 12 mm bolts and the 19 mm nut to remove this bracket.
    • Now remove the final bolt with your 19 mm socket and ratchet.
  3. Install the new control arm (3:30)
    • Remove the castle nut and remove the plastic cover from the bushing.
    • Install the control arm, gently using a hammer to convince the control arm to line up if necessary.
    • Thread the bolts through and tighten them up.
    • Install the engine bracket.
    • Torque the 19 mm bolts in the control arm to 85 ft lbs
    • Replace castle nut and thread the cotter pin through and secure it.
  4. Replace the wheel (5:40)
    • Put the wheel back on.
    • Thread on the lug nuts.
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 22mm Wrench


How-to Video:

(06:14 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 22mm Wrench



This part replaces:

  • OE # 485217Y000
  • OE # 485218J000

Vehicle Fit

  • 2002-2006 Nissan Altima Front Inner Tie Rod
  • 2003-2008 Nissan Maxima Front Inner Tie Rod
$20.95
Save 85%
List: $137.93 Save: $116.98
Part #: 1ASTE00111

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est