Replaces

1999-2004 Jeep Grand Cherokee Front Driveshaft Front CV Joint Rebuild Kit for Models with QUADRA-DRIVE DSB 4WD System

This part replaces:

  • HOLLANDER 430-0444
  • DORMAN 932-302

  • New

This CV Joint Repair Kit is just what you need to get your Jeep vehicle running great again! This kit includes the necessary parts to rebuild the front joint of the front (propeller) shaft. If your experiencing drivetrain vibration and / or noise, then this rebuild kit may be for you!

Specifications:

  • Set Includes:
    • (1) Joint assembly
    • (1) Shaft flange
    • (1) Flange gasket
    • (1) Dust cover
    • (6) Bolts
    • (1) C clip
    • (2) Boot
    • (2) Boot clamps
  • Replaces the FRONT CV joint of the Front Driveshaft
  • Replaces many dealer part numbers including: 52099497AD, 52099498AD, 52105884AA, 52111591AB, 52111593AB, 52111594AA, 52111596AB, 52853299AB
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Driveshaft (0:43 in the video)
    • Remove the 8mm bolts from the front of the driveshaft
    • Break the front of the driveshaft free with a hammer and a flat blade screwdriver
    • Have an assistant hold the driveshaft, or brace it in place
    • Remove the 8mm bolts from the rear of the driveshaft
    • Break the rear of the driveshaft free with a hammer and a flat blade screwdriver
    • Pull out the driveshaft
  2. Removing the CV Joint (2:16 in the video)
    • Pry off the larger CV joint boot clamp clip with a hammer and screwdriver
    • Pry off the smaller CV joint boot clamp clip with a hammer and screwdriver
    • Cut off the boot with a razor blade
    • Pry the top off the CV joint with a flat blade screwdriver and a hammer
    • Pull off the CV joint housing
    • Clean the driveshaft with a cloth rag
    • Pull off the CV joint clip with snap ring pliers
    • Use a hammer to remove the CV joint from the driveshaft
  3. Constructing the New CV Joint (4:10 in the video)
    • Slide the new boot onto the driveshaft
    • Slide on the smaller boot clamp
    • Slide on the larger boot clamp
    • Slide on the bottom of the CV joint housing
    • Slide on the CV joint
    • Carefully hammer the CV joint into place
    • Insert the clip into the CV joint with the snap ring pliers
    • Apply grease to the CV joint
    • Thread the bolts through the top of the CV joint housing
    • Push the top into place, using the bolts to line it up
    • Hammer the CV joint housing together
    • Thread the bolts out of the CV joint
    • Tighten the boot clamps with a pair of pliers
    • Bend the clamps into their clips
    • Cut off the extra material with wire cutters
  4. Reinstalling the Driveshaft (7:01 in the video)
    • Feed the driveshaft into place
    • Push the front of the driveshaft into place
    • Push the rear of the driveshaft into place
    • Have an assistant hold the wheel, or brace the wheel, to keep the driveshaft from turning
    • Insert the 6mm Allen bolts at the front of the driveshaft
    • Tighten the 6mm Allen bolts to between 12 - 14 foot-pounds of torque
    • Insert the 8mm bolts at the rear of the driveshaft

Tools needed for replacement:

    Allen Wrenches

  • 6 mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers
  • Slip-Joint Pliers
  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Specialty Tools

  • Assistant
  • Floor Jack
  • Hammer
  • Jack Stands
  • Razor Blade / Gasket Scraper

How-to Video:

(08:51 min)

Tools List:

    Allen Wrenches

  • 6 mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers
  • Slip-Joint Pliers
  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Specialty Tools

  • Assistant
  • Floor Jack
  • Hammer
  • Jack Stands
  • Razor Blade / Gasket Scraper



This part replaces:

  • HOLLANDER 430-0444
  • DORMAN 932-302

Vehicle Fit

  • 1999-2004 Jeep Grand Cherokee Front Driveshaft Front CV Joint Rebuild Kit for Models with QUADRA-DRIVE DSB 4WD System
  • 2002-2007 Jeep Liberty Front Driveshaft Front CV Joint Rebuild Kit
$153.95
Part #: 1ATRX00019

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est