1996-1998 Jeep Grand Cherokee Catalytic Converter for L6 4.0L with 2-1/2" Inlet1ACCD00034
This new direct fit, aftermarket, stainless steel catalytic converter is a great replacement. It is made of the highest grade materials for long lasting durability.
- High quality 409 grade stainless steel
- Includes all Pipes and flanges for direct installation (additional clamps may be required)
- EPA Certified
- CARB Certified for NON OBDII vehicles
- Built to strict quality control standards
- Inlet O.D.: 2 1/2 inches
- Outlet O.D.: 2 1/4 inches
- Overall Length: 21.75 inches
- # of Threaded Oxygen Sensor Ports: 1
Due to state emissions regulations, we cannot ship this item to the state of California as it is not C.A.R.B ( California Air Research Board) approved for use in this state.
Due to New York state emissions regulations, this item cannot be installed on a California emissions equipped vehicle in the state of New York.
All emissions information for a vehicle can be found on a tag under the hood. If the tag is missing, you can contact a dealership with your VIN to determine which emissions system your vehicle is equipped with.
5 Year Warranty
This item is backed by a 5 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
- 1996-1998 Jeep Cherokee Catalytic Converter for V8 5.2L V8
- 1996-1998 Jeep Cherokee Catalytic Converter for L6 4.0L with 2-1/2" Inlet
- 1996-2000 Jeep Cherokee Catalytic Converter for L4 2.5L with 2-1/2" Inlet
- 1998 Jeep Cherokee Catalytic Converter for V8 5.9L V8
- 1996-1998 Jeep Grand Cherokee Catalytic Converter for V8 5.2L V8
- 1996-1998 Jeep Grand Cherokee Catalytic Converter for L6 4.0L with 2-1/2" Inlet
- 1998 Jeep Grand Cherokee Catalytic Converter for V8 5.9L V8
- 1997-2000 Jeep Wrangler Catalytic Converter for L4 2.5L