Replaces

1993-1998 Jeep Grand Cherokee Front Brake Pad, Rotor & Wheel Bearing Kit Ceramic

Part Details

  • Brake Pad Friction Material: Ceramic

This part replaces:

  • OE # 52005000
  • OE # 52007710
  • OE # 5015965AA
  • OE # 52008440
  • OE # 52008264
  • OE # 53007449AB
  • OE # 53007449

  • New

This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • 4 Piece FRONT Brake Pad Set
  • No core charge
  • Includes shims
  • Professional Grade Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Fit 5 Stud Wheels
  • 11.02" Diameter

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both the RH (Passenger Side) & LH (Driver Side) FRONT
  • 3 Bolt Flanges
  • Fits 5 Lug Wheels
  • Studs already installed
  • Direct replacements

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:51)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Straighten the cotter pin on the axle nut with needle nose pliers
    • Remove the cap and washer from the axle nut
    • Loosen the axle nut with a 36mm socket and breaker bar
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Rotor (2:18)
    • Remove 13mm bolts from the brake caliper
    • Pull the caliper aside and secure it out of the way with a bungee chord
    • Pull the rotor off
  3. Removing the Hub (3:10)
    • Spray rust penetrant around the contact points of the hub
    • Remove the three 13mm 12-point bolts from the hub
    • Pry off the washer from the axle (if you have one) with a pick
    • Tap the axle in with a hammer to free the splines from the hub
    • Tap the hub out of the spindle with a hammer
    • Remove the hub and dust shield
  4. Installing the Hub (5:55)
    • Insert the dust shield into place
    • Insert the hub into place
    • Tighten the 12-point 13mm bolts
    • Torque the hub bolts to 75 foot-pounds
  5. Installing the Rotor (6:49)
    • Insert the rotor onto the hub
    • Press the caliper onto the rotor
    • Tighten the two 13mm bolts to the caliper
    • Torque the caliper mounting bolts to 20 foot-pounds
  6. Reattaching the Wheel (7:28)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Torque the axle nut to 175 foot-pounds
    • Insert the axle nut cap into place
    • Insert a new cotter pin into place
    • Turn each end of the cotter pin to opposite sides of the nut

Tools needed for replacement:

    General Tools

  • Hammer
  • Pick

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Bungee Chord

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 36mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:55 min)

Tools List:

    General Tools

  • Hammer
  • Pick

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Bungee Chord

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 36mm Socket



This part replaces:

  • OE # 52005000
  • OE # 52007710
  • OE # 5015965AA
  • OE # 52008440
  • OE # 52008264
  • OE # 53007449AB
  • OE # 53007449

Vehicle Fit

  • 1990-1993 Jeep Cherokee 4 Wheel Drive Front Brake Pad, Rotor & Wheel Bearing Kit Ceramic
  • 1994-1998 Jeep Cherokee Front Brake Pad, Rotor & Wheel Bearing Kit Ceramic
  • 1990-1992 Jeep Comanche (MJ) 4 Wheel Drive Front Brake Pad, Rotor & Wheel Bearing Kit Ceramic
  • 1993-1998 Jeep Grand Cherokee Front Brake Pad, Rotor & Wheel Bearing Kit Ceramic
  • 1990 Jeep Wagoneer 4 Wheel Drive Front Brake Pad, Rotor & Wheel Bearing Kit Ceramic
  • 1990-1995 Jeep Wrangler Front Brake Pad, Rotor & Wheel Bearing Kit Ceramic
  • 1997-1998 Jeep Wrangler Front Brake Pad, Rotor & Wheel Bearing Kit for Models with 3.25" Tall Rotors Ceramic
Part #: 1ABMS00039

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est