Replaces

1999-2004 Chevy S10 Pickup Interior Door Handle Front Pair

This part replaces:

  • DORMAN 77477,77478

  • New

These replacement interior door handles are just what you need to get your vehicle in good working order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Injection molded plastic with textured handles
  • Steel center rods and return springs
  • Include lock buttons
  • Direct replacements

These inside door handles are direct replacements and built to strict quality control standards. They are great replacements and have good cost savings over dealer units.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the door panel (1:20 in the video)
    • Remove the window crank with your removal tool.
    • Remove the Phillips screw behind the door handle.
    • Take the door handle bezel and set it aside.
    • Unscrew the two Phillips screws behind the door pull.
    • Pry the door panel off with your putty knife.
    • Disconnect the wiring harness connections.
  2. Remove the interior door handle (2:22 in the video)
    • Unclip the door lock rod.
    • Use a hammer and a flat blade screwdriver to pry off the door handle bracket.
    • The door handle will slide off towards the end of the door, away from the body of the vehicle.
    • Disconnect the door handle latch rod.
  3. install the new interior door handle (4:30 in the video)
    • Connect the door latch rod.
    • Clip the door handle into the door.
    • Double check the latch and lock rod clips behind the water shield to make sure they didn’t get unclipped.
  4. Replace the door panel (6:02 in the video)
    • Connect any wiring harness connections.
    • Pin the door panel to the door.
    • Replace the door handle bezel.
    • Secure the three Phillips screws.
    • Install the window crank if you have it.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Driver

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 7mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Paper Clip
  • Putty Knife
  • Window Crank Removal Tool

How-to Video:

(07:21 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Driver

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 7mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Paper Clip
  • Putty Knife
  • Window Crank Removal Tool



This part replaces:

  • DORMAN 77477,77478

Vehicle Fit

  • 1998-2005 Chevy Blazer S10 Interior Door Handle Front Pair
  • 1999-2004 Chevy S10 Pickup Interior Door Handle Front Pair
  • 1998-2001 GMC Jimmy S-15 Interior Door Handle Front Pair
  • 1999-2004 GMC S-15 Sonoma Interior Door Handle Front Pair
  • 1998-2000 Isuzu Hombre Interior Door Handle Front Pair
  • 1998-2004 Olds Bravada Interior Door Handle Front Pair
$24.95
Save 59%
List: $60.59 Save: $35.64
Part #: 1ADHS00126

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est