Replaces

1982-1992 Chevy Camaro Black Inside Door Handle Driver or Passenger Side

Part Details

  • Side Location: Driver or Passenger Side
  • Colors: Black

This part replaces:

  • DORMAN 77098
  • OE # 20220728

  • New

This replacement inside door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side)
  • Black Finish
  • Replaces dealer part numbers: 20220728, 20531544
  • Reinforced from the original GM design
  • Durable construction
  • Direct bolt on replacement for original
  • Includes the door mounting plate and handle

This part is a direct bolt on and is built to strict quality control standards. It makes a great replacement and has good cost savings over a dealer unit.

Special Note:

  • This new handle is made to the original color shade.  Due to vehicle age and fading from the sun, our new handles may not match your existing handle or bezel exactly.  If you are looking for an exact match, we recommend replacing handles in pairs or sets.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (1:11 in the video)
    • Remove the bolts from the door pull
    • Pull off the door pull
    • Remove the bolts from the door handle bezel
    • Pry off the window switch with a flat blade screwdriver
    • Disconnect the window switch wiring harness
    • Pry off the door lock switch with a flat blade screwdriver
    • Disconnect the door lock switch wiring harness
    • Pry off the door handle with a flat blade screwdriver
    • Pull off the door handle bezel
    • Pull off the trim piece behind the door handle
    • Pry off the door panel with a putty knife or a door panel removal tool
    • Pull off the window seal
    • Carefully peel back the watershield
    • For more detailed instructions, please see the 1986 Camaro door panel replacement video
  2. Removing the Outside Door Handle (2:42 in the video)
    • Unclip the latch rod from the door handle by hand
    • Remove the two 7/16 inch nuts from the door handle
    • Pull the door handle out from the outside of the door
  3. Installing the New Outside Door Handle (5:02 in the video)
    • Clean the door handle mounting area
    • Put the new handle into the door from the outside
    • Push the handle into the door as you fasten the two speed nuts onto the door handle
    • Clip the latch rod onto the door handle
    • Connect the window switch wiring harness
    • Turn the ignition on
    • Lower the window with the switch
    • Test that the new door handle works
    • Turn the ignition off
    • Disconnect the window switch wiring harness
  4. Reinstalling the Door Panel (7:45 in the video)
    • Put the watershield into place
    • Hang the door panel in place
    • Push in the door panel clips
    • Put on the window seal
    • Put on the trim piece behind the door handle
    • Push on the door handle bezel
    • Push on the door handle
    • Connect the door lock wiring harness
    • Push in the door lock switch
    • Connect the window switch wiring harness
    • Push in the window switch
    • Insert the bolts into the door handle bezel
    • Put the door pull into place
    • Insert the bolts into the door pull
    • For more detailed instructions, please see the 1986 Camaro door panel replacement video

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Putty Knife

  • Torx Drivers & Sockets

  • T10 Torx Driver
  • T25 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench
  • 8mm Wrench

  • Wrenches - SAE

  • 7/16 Inch Wrench

How-to Video:

(08:17 min)

Tools List:

    Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Putty Knife

  • Torx Drivers & Sockets

  • T10 Torx Driver
  • T25 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench
  • 8mm Wrench

  • Wrenches - SAE

  • 7/16 Inch Wrench



This part replaces:

  • DORMAN 77098
  • OE # 20220728

Vehicle Fit

  • 1982-1992 Chevy Camaro Black Inside Door Handle Driver or Passenger Side
  • 1982-1992 Pontiac Firebird Black Inside Door Handle Driver or Passenger Side
  • 1985-1991 Pontiac Grand Am Black Inside Door Handle Front or Rear Driver or Passenger Side
  • 1982-1992 Pontiac Trans Am Black Inside Door Handle Driver or Passenger Side
$21.45
Save 79%
List: $100.65 Save: $79.20
Part #: 1ADHI00040

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est