1996-1999 Infiniti I30 Rear Strut & Spring Assembly Pair (excluding Air Suspension) (Monroe Econo-Matic) Monroe 181293MNSSP00180-597670
- Front / Rear Location: Rear
- Quantity: Pair
- Product Line: Monroe Econo-Matic
This part replaces:
- Monroe 181293
Monroe Econo-Matic® Strut Assemblies: 181293
These are new MONROE strut and spring assemblies. We recommend replacing struts in pairs and performing an alignment after replacement.
Quantity: (2) Strut & Spring Assemblies
Side: LH (Driver Side) or RH (Passenger Side)
Vehicle Type: ALL (except models with AIR or Electronic Suspensions)
Engine Size: V6 3.0L
Built to strict quality control standards:
Quick and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the first time. Enhances the handling, safety and performance of your vehicle.
Includes the following preassembled components:
- Upper Mount
- Upper Spring Isolator
- Upper Spring Seat
- Boot Kit
- Lower Spring Isolator
- Premium Strut
The Monroe Econo-Matic Strut is a complete, ready-to-install replacement strut assembly. Each unit features a pre-assembled replacement upper mount, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and strut. This fully integrated design reduces installation time, eliminates the need for a spring compressor and helps ensure a complete repair. The Econo-matic strut features nitrogen gas charging, velocity proportional valving and all-weather fluid to deliver improved comfort.
In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.
2 Year Warranty
This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
- 1996-1999 Infiniti I30 Rear Strut & Spring Assembly Pair (excluding Air Suspension) (Monroe Econo-Matic) Monroe 181293
- 1995-1999 Nissan Maxima Rear Strut & Spring Assembly Pair (excluding Air Suspension) (Monroe Econo-Matic) Monroe 181293
Part #: MNSSP00180
Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
Brand #: 181293