Replaces

1996-1999 Infiniti I30 Front Brake Pad & Rotor Kit SEMI-METALLIC Semi-Metallic

Part Details

  • Front / Rear Location: Front
  • Brake Options: Semi-Metallic

  • New

This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Semi-Metallic Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 402062L903, 40206 2L903, 4020688E01, 40206 88E01, 4020688E04, 40206 88E04, 4020688E05, 40206 88E05, 402069E002, 40206 9E002
  • Fits 5 Stud Wheels
  • Vented
  • 11.02" (280mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:57 in the video)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Inspecting the Brakes (1:15 in the video)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicators
    • Check for gouges on both sides of the rotor
  3. Removing the Brake Pads (2:02 in the video)
    • Remove the two 14mm bolts from the brake caliper
    • Pry the caliper off with a flat blade screwdriver
    • Pull the caliper aside
    • Pull the brake pads off
  4. Removing the Brake Rotor (2:40 in the video)
    • Check that the caliper slides move freely
    • If the slides do not move freely, apply penetrating oil
    • Twist the slide out with water pump pliers and a hammer
    • Twist the slide out with a pair of vise-grip pliers
    • Remove the two 19mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. Installing the New Brake Rotor (4:29 in the video)
    • Slide the rotor on
    • Thread one lug nut by hand to hold the rotor in place
    • Put the bracket back into place
    • Start the two 19mm bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
    • Clean the caliper slides with a wire brush
    • Apply penetrating oil to the slides
    • Apply bearing grease to the slides
    • Insert the caliper slides
  6. Installing the New Brake Pads (5:41 in the video)
    • Use a large C-clamp to push the pistons back into the caliper
    • Install the new brake pads into the bracket with the wear indicator tab on the upper side
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten the two 14mm bolts to 20 foot-pounds
    • Pull the wheel straight
    • Remove the place holder lug nut
  7. Reattaching the Wheel (7:43 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 - 110 foot-pounds in a crossing or star pattern
  8. Testing the Brakes (8:16 in the video)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Bearing Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers
  • Vise Grip Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Hammer
  • Wire Brush

How-to Video:

(08:45 min)

Tools List:

    Materials, Fluids, and Supplies

  • Bearing Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers
  • Vise Grip Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Hammer
  • Wire Brush




Vehicle Fit

  • 1996-1999 Infiniti I30 Front Brake Pad & Rotor Kit SEMI-METALLIC Semi-Metallic
  • 1989-1998 Nissan Maxima Front Brake Pad & Rotor Kit SEMI-METALLIC Semi-Metallic
  • 1999 Nissan Maxima Front Brake Pad & Rotor Kit SEMI-METALLIC (Built Before 4/01/99 Production Date) Semi-Metallic
$65.95
Part #: 1ABFS00766

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est