Replaces

1994-1997 Honda Accord Ignition Switch

This part replaces:

  • STANDARD MOTOR PRODUCTS US-288T

  • New

This is the ignition switch that mounts inside the steering column.

  • Common Problems
  • Damaged during a theft attempt
  • No start condition occur because the junction block contacts corrode and short out.
  • No start condition because the contacts in the rotating upper assembly wear out
  • While Driving your gauges and dash lights flicker as if the vehicle shuts off for a brief second

If your vehicle is having issues when starting such as the power comes on in the car when you turn the key on but then the engine does not turn over or if accessories don't seem to work and you've checked things like the battery and fuses this part may be your problem. If your contacts are corroded you can clean them but once the protective coating is gone then they will most likely corrode again quicker and possibly short out. If you are having problems with this part then fix it right the first time.

  • Mounts inside the steering column and connects to the lock cylinder and main column harness, When the key cylinder is turned, it turns the switch on this harness that sends the electrical single to start the vehicle
  • Replaces dealer part numbers: 35130S30003, 35130-S30-003, 35130SV4003, 35130-SV4-003
  • Exact fit
  • No cutting or splicing necessary
  • 7 Terminal Connection
  • Fits all tilt and non tilt columns

These are electrical parts and are all tested before they leave our warehouse.

This electrical item is not returnable, it is only eligible for exchange.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Disconnect the negative battery cable.
  2. Step 2: Remove steering column trim
    • Remove the three screws securing it.
    • Pull off the trim.
  3. Step 3 remove the ignition switch
    • Remove the two bolts using your 8mm socket and ratchet.
    • Unplug the wiring harness.
    • Unscrew the Phillips screw to remove the switch.
  4. Step 4 Reassemble
    • Put the switch back on the ignition piece and screw it back in.
    • Plug all the wiring back in.
    • Bolt the ignition piece back into the steering column.
    • Replace the steering column trim and bolt it back on.
    • Reconnect the battery.

How-to Video:

(06:29 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket



This part replaces:

  • STANDARD MOTOR PRODUCTS US-288T

Vehicle Fit

  • 1997 Acura CL Ignition Switch
  • 1995-1998 Acura TL Ignition Switch
  • 1994-1997 Honda Accord Ignition Switch
  • 1997 Honda Prelude Ignition Switch
$45.95
Part #: 1AZIS00012

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est