Replaces

1998-1999 Olds Cutlass Ignition Switch

This part replaces:

  • HOLLANDER 633-00157, 633-00211
  • DORMAN 924-701
  • STANDARD MOTOR PRODUCTS US-271
  • OE # 22670487
  • OE # 22599340
  • OE # D1432D

  • New

This ignition switch is a new, aftermarket replacement.

Specifications

  • Exact fit
  • No cutting or splicing necessary
  • Built to strict quality control standards
  • Connection Type:
    • (2) Plug - 5 & 4 Terminals

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Lower Panel (0:41)
    • Disconnect the negative battery cable with an 8mm socket
    • Push the tabs on the panel beneath the steering wheel
    • Remove the panel
    • Twist the socket and remove the bulb from the panel
    • Remove the two 7mm screws from the lower panel
    • Pull out the fuse panel door
    • Remove the lower panel by pulling on both sides
    • Remove the wiring harness from the lower panel with a flat blade screwdriver
  2. Removing the Steering Wheel Panels (1:47)
    • Remove the T25 screw from beneath the steering wheel
    • Pry out on the tilt lever on the lower steering wheel panel
    • Remove the lower steering wheel panel
    • Remove the two E5 External Torx bolts from each side of the upper panel
    • Remove the upper steering wheel panel
  3. Removing the Dash Panel (2:47)
    • Remove the fuse panel door
    • Remove the 7mm bolts from the fuse panel
    • Remove the 7mm bolt from the glove box
    • Pry off the key ignition bezel with a flat blade screwdriver
    • Pull out on either side of the dash panel
    • Pull the dash panel forward
    • Remove the hazard switch wiring harness with a flat blade screwdriver
    • Put the keys in the ignition
    • Turn it to the on position
    • Pull the shifter back all the way
    • Lift the dash panel up and out
  4. Removing the Ignition Switch (4:15)
    • Remove the four 7mm bolts from the steel panel
    • Remove the four 10mm bolts from the steel panel
    • Remove the two 10mm bolts holding the ignition switch
    • Pull the ignition switch down through the steel panel's area
    • Put the key in the ignition, turn it on
    • Remove the ignition switch wiring harness with a flat blade screwdriver
    • Push in on the tab and pull the lock cylinder free
    • Remove the lock body harness
  5. Installing the New Ignition Switch (6:28)
    • Push in the piston on the inside of the lock body with your finger
    • Match the piston with the ignition harness and connect the wiring harness
    • Insert the key into the ignition
    • Turn the key to align the ignition with the lock body
  6. Testing the Ignition (6:54)
    • Connect the ignition switch wiring harness
    • Turn the key to the off position
    • Remove the key
    • Reconnect the two wiring harnesses to the ignition
    • Connect the negative battery cable with an 8mm socket
    • Place the key in the ignition and turn the vehicle on
  7. Installing the Ignition (7:36)
    • Feed the ignition switch into its slot
    • Insert the two 10mm bolts holding the ignition
    • Replace the steel panel
    • Insert and tighten the four 7mm bolts
    • Insert and tighten the four 10mm bolts
  8. Reinstalling the Dash Panel (8:45)
    • Open the glove box
    • Turn the key to the on position
    • Pull the shifter back
    • Pull the steering wheel down
    • Tuck the dash panel behind the steering wheel
    • Connect the hazard switch wiring harness
    • Slide the shifter forward
    • Remove the key
    • Push in the clips on the dash panel
    • Replace the two 7mm bolts on the dash panel
    • Insert the ignition bezel
  9. Installing the Steering Wheel Panels (10:10)
    • Tilt the steering wheel down
    • Insert the upper steering wheel panel
    • Replace the E5 inverted Torx bolts
    • Insert the lower steering wheel panel
    • Insert the T25 screw from beneath the steering wheel
  10. Installing the Lower Panel (11:06)
    • Connect the wiring harness
    • Push in the lower panel
    • Insert the two 7mm screws from the lower panel
    • Push the bulb into the socket
    • Push in the tabs on the panel beneath the steering wheel
    • Push the tilt lever back into place
    • Push in the fuse panel door

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 7mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • E5 Inverted Torx Socket
  • T25 Torx Driver


How-to Video:

(12:30 min)

Tools List:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 7mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • E5 Inverted Torx Socket
  • T25 Torx Driver



This part replaces:

  • HOLLANDER 633-00157, 633-00211
  • DORMAN 924-701
  • STANDARD MOTOR PRODUCTS US-271
  • OE # 22670487
  • OE # 22599340
  • OE # D1432D

Vehicle Fit

  • 2004-2005 Chevy Classic Ignition Switch
  • 2000-2001 Chevy Impala Ignition Switch for Models with Floor Console
  • 2002-2005 Chevy Impala Ignition Switch
  • 2000-2001 Chevy Lumina Ignition Switch for Models with Floor Console
  • 1997-2003 Chevy Malibu Ignition Switch
  • 2000-2005 Chevy Monte Carlo Ignition Switch
  • 1999-2004 Olds Alero Ignition Switch
  • 1997 Olds Cutlass Ignition Switch (excluding Supreme Models)
  • 1998-1999 Olds Cutlass Ignition Switch
  • 1998-2002 Olds Intrigue Ignition Switch
  • 1999-2005 Pontiac Grand Am Ignition Switch
$57.45
Save 70%
List: $193.74 Save: $136.29
Part #: 1AZIS00006

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est