Replaces

2006-2007 Chevy Monte Carlo Ignition Lock Cylinder

This part replaces:

  • OE # 15794826
  • DORMAN 924-716

  • New

These ignition key lock cylinder & tumblers are new aftermarket parts. If your ignition lock cylinder is broken, damaged, or malfunctioning then these are the parts for you!

Specifications:

  • Brand New Ignition Lock Cylinder
    • Includes tumblers for coding to original key(s)
  • Replaces dealer part number: 15794826
  • Direct replacement
  • Built to strict quality control standards
NOTE for Silverado/Sierra Models: Ignition key lock cylinder & tumblers fit New Body Style Models only. New Body Style has a smooth door skin. Classic Body Style has a crease down the center of the door shell.

This ignition key lock cylinder & tumblers kit makes a great replacement and has good cost savings over the dealer part!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Disconnecting the Battery (0:43 in the video)
    • Disconnect the negative battery cable with a 10mm socket and ratchet
  2. Accessing the Ignition Lock Cylinder (1:03 in the video)
    • Raise the steering wheel
    • Remove the two 7mm or T25 Torx screws from the bottom dash panel
    • Pull down the lower dash panel
    • Remove the T25 screw from the bottom of the steering wheel
    • Pull off the lower steering column panel
    • Pull off the upper steering column panel
  3. Removing the Lock Cylinder (2:02 in the video)
    • Disconnect the ignition electrical connection at the top
    • Insert the key into the lock cylinder
    • Turn the key to the on position
    • Press a pick or awl into the lock cylinder hole
    • Remove the lock cylinder
  4. Preparing the New Lock Cylinder (2:21 in the video)
    • Apply white grease to the old lock cylinder tumblers
    • Pry off the tumbler retainers with a pick
    • Prepare a diagram of the lock
    • Pull out the first tumbler
    • Put it in the first position on the diagram
    • Pull out each subsequent tumbler, putting it in position on the diagram
    • If you are replacing an old style cylinder with a new style cylinder, omit the first tumbler from the diagram
    • Put a spring into the first tumbler slot on the new lock cylinder
    • Check the number on the next tumbler
    • Insert a tumbler with the same number into the corresponding tumbler of the new lock cylinder
    • For each subsequent tumbler, put in a spring and a tumbler whose number matches the corresponding tumbler from the old lock cylinder
    • Insert the key into the new lock cylinder to test it
    • Apply white grease to the new lock cylinder
  5. Installing the New Lock Cylinder (7:23 in the video)
    • Push the lock cylinder into place with the groove fitting into the steering column groove
    • Connect the ignition electrical connection
  6. Reconstructing the Steering Column (7:41 in the video)
    • Put on the upper steering column panel
    • Put on the lower steering column panel
    • Clip the steering column panels together
    • Insert the T25 Torx screw into the steering column
    • Push on the lower dash panel
    • Insert the two 7mm or T25 screws into the lower dash panel
  7. Reconnecting the Battery (8:05 in the video)
    • Reconnect the negative battery cable with a 10mm socket and ratchet

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Marker / Writing Utensil
  • White Grease

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Bent Tipped Awl
  • Pick

  • Torx Drivers & Sockets

  • T25 Torx Driver

How-to Video:

(08:41 min)

Tools List:

    Materials, Fluids, and Supplies

  • Marker / Writing Utensil
  • White Grease

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Bent Tipped Awl
  • Pick

  • Torx Drivers & Sockets

  • T25 Torx Driver



This part replaces:

  • OE # 15794826
  • DORMAN 924-716

Vehicle Fit

  • 2005 Buick Century Ignition Lock Cylinder
  • 2005-2009 Buick LaCrosse Ignition Lock Cylinder
  • 2009-2011 Buick Lucerne Ignition Lock Cylinder
  • 2007-2008 Cadillac DTS Ignition Lock Cylinder
  • 2007-2013 Cadillac Escalade Ignition Lock Cylinder
  • 2008-2013 Cadillac Escalade ESV Ignition Lock Cylinder
  • 2008-2013 Cadillac Escalade EXT Ignition Lock Cylinder
  • 2009-2013 Cadillac Escalade Hybrid Ignition Lock Cylinder
  • 2004-2009 Cadillac SRX Ignition Lock Cylinder
  • 2007-2013 Chevy Avalanche 1500 Ignition Lock Cylinder
  • 2008-2013 Chevy Express 1500 Van Ignition Lock Cylinder
  • 2008-2013 Chevy Express 2500 Van Ignition Lock Cylinder
  • 2008-2013 Chevy Express 3500 Van Ignition Lock Cylinder
  • 2006-2013 Chevy Impala Ignition Lock Cylinder
  • 2006-2007 Chevy Monte Carlo Ignition Lock Cylinder
  • 2007 Chevy Silverado 1500 Ignition Lock Cylinder New Body Style Models
  • 2008-2013 Chevy Silverado 1500 Ignition Lock Cylinder
  • 2007 Chevy Silverado 2500 HD Ignition Lock Cylinder New Body Style Models
  • 2008-2013 Chevy Silverado 2500 HD Ignition Lock Cylinder
  • 2007 Chevy Silverado 3500 Ignition Lock Cylinder New Body Style Models
  • 2008-2013 Chevy Silverado 3500 Ignition Lock Cylinder
  • 2009-2013 Chevy Silverado Hybrid Ignition Lock Cylinder
  • 2007-2013 Chevy Suburban 1500 Ignition Lock Cylinder
  • 2007-2013 Chevy Suburban 2500 Ignition Lock Cylinder
  • 2007-2013 Chevy Tahoe Ignition Lock Cylinder
  • 2008-2013 Chevy Tahoe Hybrid Ignition Lock Cylinder
  • 2005-2006 Chevy Uplander Ignition Lock Cylinder for Models with Large "Z-Groove" Head Key (excluding Winged Bezel)
  • 2008-2013 GMC Savana 1500 Van Ignition Lock Cylinder
  • 2008-2013 GMC Savana 2500 Van Ignition Lock Cylinder
  • 2008-2013 GMC Savana 3500 Van Ignition Lock Cylinder
  • 2007 2007, 2013 GMC Sierra 1500 Ignition Lock Cylinder New Body Style Models
  • 2008-2013 GMC Sierra 1500 Ignition Lock Cylinder
  • 2013 2007, 2013 GMC Sierra 1500 Ignition Lock Cylinder New Body Style Models
  • 2007 GMC Sierra 2500 HD Ignition Lock Cylinder New Body Style Models
  • 2008-2013 GMC Sierra 2500 HD Ignition Lock Cylinder
  • 2007 GMC Sierra 3500 Ignition Lock Cylinder New Body Style Models
  • 2008-2013 GMC Sierra 3500 Ignition Lock Cylinder
  • 2008-2013 GMC Sierra Denali 1500 Ignition Lock Cylinder
  • 2011-2013 GMC Sierra Denali 2500 Ignition Lock Cylinder
  • 2011-2013 GMC Sierra Denali 3500 Ignition Lock Cylinder
  • 2009-2013 GMC Sierra Hybrid Ignition Lock Cylinder
  • 2007-2013 GMC Yukon Ignition Lock Cylinder
  • 2008-2013 GMC Yukon Hybrid Ignition Lock Cylinder
  • 2007-2013 GMC Yukon XL 1500 Ignition Lock Cylinder
  • 2007-2013 GMC Yukon XL 2500 Ignition Lock Cylinder
  • 2007-2013 GMC Yukon XL Denali Ignition Lock Cylinder
  • 2008-2009 Hummer H2 Ignition Lock Cylinder
$75.45
Save 28%
List: $105.44 Save: $29.99
Part #: 1AIMX00183

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est