Replaces

2000-2005 Chevy Monte Carlo Ignition Lock Cylinder Case Housing

This part replaces:

  • OE # 25832354
  • DORMAN 924-702

  • New

This ignition key lock cylinder housing or Passlock ignition switch case is a new aftermarket part. It is the piece that your ignition lock cylinder fits into inside your dash. When your key becomes stuck in the ignition, this piece usually has to be drilled into thus destroying your ability to start the car. This housing has been designed to replace the broken part.

Specifications:

  • Diecast Metal Construction
  • Holds lgnition lock cylinder and mounts inside dash
  • Replaces dealer part number: 25832354
  • Direct Replacement
  • Built to strict quality control standards

This part makes a great replacement and has substantial cost savings over a dealer part.

 

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Accessing the Lock Cylinder Case
    • Use an 8mm wrench to disconnect your negative battery cable.
    • Remove the car cigarette lighter.
    • Pull the ashtray out.
    • Remove the trim panel. Unplug the cigarette lighter to free it.
    • Remove the three 7mm bolts that hold the radio in.
    • Pull the radio out and disconnect the radio and antenna connections to free the radio.
  2. Step 2: Changing the Lock Cylinder Case
    • Turn the key to the on position.
    • Insert a screwdriver into the small hole underneath the lock cylinder.
    • Pull the key back to remove the lock cylinder.
    • Press the small button on the back of the cylinder while pushing to separate the case from the cylinder.
    • Push the button down and slide the cylinder into the new case.
    • Turn the key to on and reinsert the cylinder.
  3. Step 3: Replacing the Radio and Trim
    • Reconnect the radio and antenna to the radio.
    • Line up the radio and push it into place.
    • Reinsert the three bolts.
    • Reconnect the cigarette lighter and snap the trim back into place.
    • Replace the ashtray and lighter.
    • Reconnect the battery.

How-to Video:

(04:33 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket

  • Wrenches - Metric

  • 8mm Wrench



This part replaces:

  • OE # 25832354
  • DORMAN 924-702

Vehicle Fit

  • 2004-2005 Chevy Classic Ignition Lock Cylinder Case Housing
  • 2000-2005 Chevy Impala Ignition Lock Cylinder Case Housing
  • 2004-2005 Chevy Impala SS Ignition Lock Cylinder Case Housing
  • 1997-2003 Chevy Malibu Ignition Lock Cylinder Case Housing
  • 2000-2005 Chevy Monte Carlo Ignition Lock Cylinder Case Housing
  • 2000-2005 Chevy Monte Carlo SS Ignition Lock Cylinder Case Housing
  • 1999-2004 Olds Alero Ignition Lock Cylinder Case Housing
  • 1997-1999 Olds Cutlass Ignition Lock Cylinder Case Housing
  • 1998-2002 Olds Intrigue Ignition Lock Cylinder Case Housing
  • 1999-2005 Pontiac Grand Am Ignition Lock Cylinder Case Housing
$103.95
Save 53%
List: $219.47 Save: $115.52
Part #: 1AIMX00140

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est