Replaces

2000-2007 Honda Accord Ignition Coil for V6 3.0L (Set of 6)

Part Details

  • Quantity: Set of 6

  • New

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

Specifications:

  • Brand New
  • Comes as a SET OF 6
  • Replaces dealer part numbers: 6218283, 30520P8EA01, 30520-P8E-A01, 30520P8FA01, 30520-P8F-A01, 30520P8FA02, 30520-P8F-A02
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested
  • Fits 6 cylinder engines only

These are electrical parts and are all tested before they leave our manufacturer. This electrical item is not returnable; it is only eligible for exchange.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Engine Covers (0:53 in the video)
    • Remove the four 10mm bolts from the upper engine cover
    • Lift off the upper engine cover
    • Loosen the two plastic clips on the lower engine cover with a flat blade screwdriver
    • Lift off the lower engine cover
  2. Removing the Ignition Coil (1:45 in the video)
    • Disconnect the ignition coil wiring harness
    • Remove the T40 Torx bolt from the ignition coil
    • Pull the ignition coil up and out
  3. Installing the Ignition Coil (2:55 in the video)
    • Push the ignition coil into place
    • Insert the T40 Torx bolt into the ignition coil
    • Connect the ignition coil wiring harness
    • Repeat Steps 2 through 3 for the remaining coils
  4. Installing the Engine Covers (3:51 in the video)
    • Push on the lower engine cover
    • Tighten the lower engine cover clips with a flat blade screwdriver
    • Push on the upper engine cover
    • Insert the four 10mm bolts into the upper engine cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T40 Torx Bit

How-to Video:

(05:00 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T40 Torx Bit




Vehicle Fit

  • 2001-2003 Acura CL Ignition Coil (Set of 6)
  • 2005-2008 Acura RL Ignition Coil (Set of 6)
  • 2000-2008 Acura TL Ignition Coil (Set of 6)
  • 2000-2007 Honda Accord Ignition Coil for V6 3.0L (Set of 6)
  • 2005-2006 Honda Accord Hybrid Ignition Coil (Set of 6)
  • 1999-2007 Honda Odyssey Ignition Coil (Set of 6)
  • 2008-2010 Honda Odyssey Ignition Coil (Set of 6) (excluding EX-L Models) (excluding Touring Models)
$138.95
Save 76%
List: $568.74 Save: $429.79
Part #: 1AEEK00207

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est