Replaces

2003-2003 Jeep Wrangler Ignition Coil for L4 2.4L

This part replaces:

  • OE # 4557468
  • STANDARD MOTOR PRODUCTS UF-189T

  • New

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition where the car looses power especially at higher engine RPM.

This Ignition Coil features the following specifications:

  • New not remanufactured
  • Replaces dealer part number: M05269670
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested
  • Has a flat pin connector
    • Will not fit models with a oval or round plug connector
  • Fits 4 cylinder models

 

These are electrical parts and are all tested before they leave our warehouse. This electrical item is not returnable; it is only eligible for exchange.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the ignition coil (1:04 in the video)
    • Remove the 13 mm socket with an extension and remove the intake manifold mounting bolts.
    • Use a 13 mm socket and ratchet to disconnect the EGR tube.
    • Now with an 8 mm socket and ratchet remove the 8 mm bolt on the EGR tube.
    • Take your 8 mm socket and extension, remove the five bolts securing the intake manifold.
    • Lift up the intake manifold and prop it up with a block of wood.
    • Unplug the spark plug wires.
    • If you are concerned about forgetting which order to plug them back in, use a marker to label them.
    • Disconnect the wiring harness connection.
    • Remove the four bolts and lift your coil up and out.
  2. Install the new ignition coil (7:23 in the video)
    • Mount the new ignition coil
    • Bolt it into place.
    • Connect the wiring harness.
    • Plug in the spark plug wires.
    • Carefully replace the intake manifold.
    • You may want to replace the intake manifold gasket to prevent a leak from forming, as unbolting the intake manifold deteriorates the gaskets sealing ability.
    • Bolt the five 8 mm bolts down, tightening them evenly.
    • Reconnect the EGR tube, bolting in the 8 and 13 mm bolts.
    • Replace the 13 mm mounting bolt.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 8mm Socket

  • Specialty Tools

  • Block of Wood

How-to Video:

(11:49 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 8mm Socket

  • Specialty Tools

  • Block of Wood



This part replaces:

  • OE # 4557468
  • STANDARD MOTOR PRODUCTS UF-189T

Vehicle Fit

  • 1997-2000 Chrysler Cirrus Ignition Coil for L4 2.4L
  • 2001-2003 Chrysler PT Cruiser Ignition Coil
  • 1997-1999 Chrysler Sebring Ignition Coil for L4 2.4L
  • 1997-1999 Chrysler Sebring Ignition Coil for L4 2.0L
  • 2001 Chrysler Sebring Sedan Ignition Coil for L4 2.4L
  • 2002-2003 Chrysler Sebring Sedan Convertible Ignition Coil for L4 2.4L
  • 1997-1999 Dodge Avenger Ignition Coil for L4 2.0L
  • 1997-2003 Dodge Caravan Ignition Coil for L4 2.4L
  • 1997-2003 Dodge Neon Ignition Coil
  • 1996 Dodge Stratus Ignition Coil for L4 2.0L with Flat Pin Connector
  • 1997-2000 Dodge Stratus Ignition Coil for L4 2.0L
  • 1997-2000 Dodge Stratus Ignition Coil for L4 2.4L
  • 2001-2003 Dodge Stratus Sedan Ignition Coil for with for L4 2.4L
  • 1997-1998 Eagle Talon Ignition Coil (excluding Turbo Models)
  • 2002-2003 Jeep Liberty Ignition Coil for L4 2.4L
  • 2003 Jeep Wrangler Ignition Coil for L4 2.4L
  • 1997-1999 Mitsubishi Eclipse Ignition Coil for L4 2.0L (excluding Turbo Models)
  • 1996 Plymouth Breeze Ignition Coil for L4 2.0L with Flat Pin Connector
  • 1997-2000 Plymouth Breeze Ignition Coil
  • 1997-2003 Plymouth Voyager Ignition Coil for L4 2.4L
$40.45
Part #: 1AECI00010

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est