Replaces

2003-2007 Nissan Murano Ignition Coil for V6 3.5L (Wells)

This part replaces:

  • WELLS C1406
  • OE # 224488J11C, 224488J115

  • New

WELLS IGNITION COIL: C1406

Wells offers the industry's most extensive line of premium quality replacement ignition components for domestic and foreign-nameplate vehicles. This comprehensive product range includes parts that precisely match OE fit, form and function as well as Wells-optimized components that eliminate known original equipment design flaws.

Specifications:

  • Brand New Wells Coil
  • Replaces dealer part numbers: 22448-8J11C, 224488J11C, 22448-8J115, 224488J115
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested
  • Includes spark plug boot with spring

This coil is a distributorless application. Sold as Each six are required per car, replace individually as needed.

Note: For 2002 production models: You can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

These are electrical parts and are all tested before they leave our manufacturer. This electrical item is not returnable; it is only eligible for exchange.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Front Ignition Coils (0:58 in the video)
    • Remove the four T30 Torx bolts from the engine cover
    • Remove the 10mm bolt from the ignition coil
    • Disconnect the ignition coil wiring lead
    • Pull out the ignition coil by hand
  2. Installing the New Front Ignition Coils (1:52 in the video)
    • Push the new coil into place
    • Connect the ignition coil wiring lead
    • Insert the 10mm bolt into the ignition coil
    • Repeat Steps 1 and 2 for the other two front ignition coils
  3. Accessing the Rear Ignition Coils (2:46 in the video)
    • Use a flat blade screwdriver to loosen the intake hose clamp screw
    • Disconnect the green wiring connector
    • Loosen the clamp on the middle intake line with the slip joint pliers
    • Disconnect the hose
    • Remove the two 10mm bolts from the front intake plenum brackets
    • Remove the two 12mm bolts from the rear intake plenum bracket
    • Loosen the clamp on the back vacuum line with the slip joint pliers
    • Remove the two 12mm nuts and three 12mm bolts from the front of the intake plenum
    • Disconnect the blue wiring harness
    • Pry the wires out of its clip with a flat blade screwdriver
    • Disconnect the wiring harnesses behind the plenum
    • Pry the wires out of its clip with a flat blade screwdriver
    • Pull the plenum up and out of the way
  4. Replacing the Rear Ignition Coils (8:18 in the video)
    • Replace these coils using the steps outlined in Steps 1 and 2
  5. Reinstalling the Intake Plenum (8:31 in the video)
    • Make sure nothing gets caught underneath the intake plenum
    • Push the plenum into place
    • Reconnect the intake hose
    • Start the two 12mm nuts and three 12mm bolts into the plenum by hand
    • Insert the two 12mm bolts into the rear plenum bracket
    • Tighten the two 12mm nuts and the three 12mm bolts to between 25-30 foot-pounds of torque
    • Reconnect the rear wiring harness
    • Insert the 10mm bolts into the front plenum brackets
    • Connect the wiring harnesses on the side of the plenum
    • Connect the vacuum hoses
    • Check that there are no loose connections
    • Put the engine cover back on
    • Insert the four T30 Torx screws into the engine cover

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench

How-to Video:

(12:35 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench



This part replaces:

  • WELLS C1406
  • OE # 224488J11C, 224488J115

Vehicle Fit

  • 2002 Infiniti I35 Ignition Coil for V6 3.5L (Built After 9/30/01 Production Date) (Wells)
  • 2003-2004 Infiniti I35 Ignition Coil for V6 3.5L (Wells)
  • 2002 Infiniti QX4 Ignition Coil for V6 3.5L (Built After 9/30/01 Production Date) (Wells)
  • 2003 Infiniti QX4 Ignition Coil for V6 3.5L (Wells)
  • 2002 Nissan Altima Ignition Coil for V6 3.5L (Built After 9/30/01 Production Date) (Wells)
  • 2003-2006 Nissan Altima Ignition Coil for V6 3.5L (Wells)
  • 2005-2013 Nissan Frontier Ignition Coil for V6 4.0L (Wells)
  • 2002 Nissan Maxima Ignition Coil for V6 3.5L (Built After 9/30/01 Production Date) (Wells)
  • 2003-2008 Nissan Maxima Ignition Coil for V6 3.5L (Wells)
  • 2003-2007 Nissan Murano Ignition Coil for V6 3.5L (Wells)
  • 2012-2013 Nissan NV 1500 Ignition Coil for V6 4.0L (Wells)
  • 2012-2013 Nissan NV 2500 Ignition Coil for V6 4.0L (Wells)
  • 2012-2013 Nissan NV 3500 Ignition Coil for V6 4.0L (Wells)
  • 2002 Nissan Pathfinder Ignition Coil for V6 3.5L (Built After 9/30/01 Production Date) (Wells)
  • 2003-2004 Nissan Pathfinder Ignition Coil for V6 3.5L (Wells)
  • 2005-2012 Nissan Pathfinder Ignition Coil for V6 4.0L (Wells)
  • 2004-2009 Nissan Quest Ignition Coil for V6 3.5L (Wells)
  • 2005-2013 Nissan Xterra Ignition Coil for V6 4.0L (Wells)
  • 2009-2012 Suzuki Equator Ignition Coil for V6 4.0L (Wells)
$69.95
Part #: WEECI00013

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
WELLS
Brand #: C1406

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est