Replaces

Idler Arm Bracket Assembly MOOG K6722 - MGSIA00001

This part replaces:

  • MOOG K6722
  • OE # 26059031

  • New

MOOG K6722 [IDLER ARM BRACKET HOUSING ASSEMBLY]

This Moog brand replacement Idler Arm Bracket Assembly is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

This bracket (pivot) assy is what one side of the idler arm attaches to. The other end of the idler arm connects to the center or drag link on the passenger side of your steering linkage. Typically it supports the right hand side of your steering linkage by bolting to the bracket and pivoting the same as the pitman arm. Over time the bracket assembly can wear causing a sloppy steering feel.

Specifications:

  • Mounts on RH (Passenger Side) Front Frame
  • Commonly referred to as the "Idler Arm Housing"
  • Idler arm bolts to it
  • Replaces dealer part number: 26059031
  • Direct replacement
  • Built to strict quality control standards
  • Includes Problem Solving Grease Hose Kit

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel (1:00 in the video)
    • Loosen the lug nuts.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
  2. Remove the front shield (1:15 in the video)
    • Use a 15 mm socket and ratchet.
    • Remove the four bolts.
  3. Remove the Idler Arm (1:25 in the video)
    • Remove the 24 mm bolt securing the idler arm to the steering linkage
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three other bolts securing the idler arm.
    • Use a Tie Rod Puller to pull apart the idler arm and the idler shaft.
  4. Install the new idler arm (4:34 in the video)
    • Assemble your new idler arm to your idler shaft, threading on the bushing and nut.
    • Bolt in the idler arm assembly into place, tightening up the three nuts.
    • Bolt in the end of the idler arm assembly to the steering gear.
    • Torque the nuts and bolts to 80 ft lbs.
    • Install the cotter pin.
    • Use a grease gun and fill the grease fitting.
  5. Reassembly (7:25 in the video)
    • Replace the shield with the four 15mm bolts.
    • Clip the air bag harness back in.
    • Put the wheel back on and lower the car
    • Using a star pattern torque the lug nuts to 120-140 ft lbs

Tools needed for replacement:

    Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 22mm Socket
  • 24mm Socket

  • Specialty Tools

  • Grease Gun
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Tie Rod Fork
  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench

How-to Video:

(08:13 min)

Tools List:

    Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 22mm Socket
  • 24mm Socket

  • Specialty Tools

  • Grease Gun
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Tie Rod Fork
  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • MOOG K6722
  • OE # 26059031

Vehicle Fit

  • 1999-2000 Cadillac Escalade Idler Arm Bracket Assembly (Moog)
  • 1993-1999 Chevy C1500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-2000 Chevy C2500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-2000 Chevy C3500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-1999 Chevy K1500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-2000 Chevy K2500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-2000 Chevy K3500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-1999 Chevy Suburban C1500 Idler Arm Bracket Assembly (Moog)
  • 1993-1999 Chevy Suburban C2500 Idler Arm Bracket Assembly (Moog)
  • 1993-1999 Chevy Suburban K1500 Idler Arm Bracket Assembly (Moog)
  • 1993-1999 Chevy Suburban K2500 Idler Arm Bracket Assembly (Moog)
  • 1995-2000 Chevy Tahoe Idler Arm Bracket Assembly (Moog)
  • 1993-1999 GMC C1500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-2000 GMC C2500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-2000 GMC C3500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-1999 GMC K1500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-2000 GMC K2500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-2000 GMC K3500 Truck Idler Arm Bracket Assembly (Moog)
  • 1993-1999 GMC Suburban Idler Arm Bracket Assembly (Moog)
  • 1993-2000 GMC Yukon Idler Arm Bracket Assembly (Moog)
$94.45
Part #: MGSIA00001

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MOOG
Brand #: K6722

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est