Replaces

Honda Civic Radiator Cooling Fan Assembly - 1ARFA00025

This part replaces:

  • OE # 19000PSLF513
  • OE # 19030PLC003
  • OE # 19015PLC003
  • Partslink HO3115115
  • Hollander 674-59604
  • Dorman 620-219

  • New

Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market! This radiator fan assembly is a complete, ready to bolt on, direct replacement part.

Specifications:

  • (RH) Passenger Side
  • New, not rebuilt, electric motor
  • 5 Geometrically designed plastic blades for optimal circulation and uniform balance
  • Plastic shroud designed to ensure structural integrity and endurance for maximum performance
  • Performance tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug for trouble free installation

Now you can buy a high quality cooling fan assembly that is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    Before starting this repair, make sure that your engine is cool

  1. Draining the Coolant (0:43)
    • Make sure the engine is cool
    • Place a drain pan beneath the coolant drain plug
    • Twist the coolant drain plug
    • Let the coolant drain
    • Remove the radiator cap
  2. Removing the Battery (1:27)
    • Loosen the negative battery cable with a 10mm wrench
    • Loosen the positive batter cable with a 10mm wrench
    • Pull the clip from the mounting bolt
    • Remove the mounting bolts with a 10mm wrench
    • Remove the battery mount
    • Remove the battery cover
    • Lift the battery up and out
    • Remove the lower battery retainer
  3. Removing the Coolant Overflow Bottle (2:20)
    • Remove the 10mm bolt from the coolant overflow bottle
    • Lift the reservoir up and out, unclipping the hose as you go
    • Pry off the retaining clip from the lower hose
    • Twist and pull the hose off
  4. Removing the Radiator Cooling Fan (3:00)
    • Place a drip pan underneath the coolant hose
    • Remove the 10mm bolt from the ground wire
    • Loosen the coolant hose clamp with pliers
    • Remove the coolant hose
    • Remove the two 10mm bolts from the radiator fan assembly
    • Disconnect the fan assembly wiring harness
    • Disconnect the coolant temperature sensor
    • Pull the radiator fan assembly up and out
    • Remove the center cover from the old fan
  5. Installing the Radiator Cooling Fan (5:11)
    • Insert the center cover to the new fan
    • Insert the cooling fan down into place
    • Connect the fan wiring harness
    • Tighten the 10mm mounting bolts to the top of the fan
    • Reconnect the coolant temperature sensor
    • Insert the coolant hose into place
    • Tighten the coolant hose clamps
    • Tighten the 10mm ground bolt
  6. Reinstalling the Coolant Overflow Bottle (7:08)
    • Insert the hose into place
    • Tighten the hose clamp to the hose with a pair of pliers
    • Clip the hose to the bottle
    • Insert the coolant bottle into its slot
    • Tighten the 10mm bolt to the bottle
  7. Installing the Battery (8:14)
    • Insert the lower battery retainer
    • Insert the battery into place
    • Replace the battery cover
    • Insert the battery mount into place
    • Reinstall the 10mm bolts
    • Connect the positive battery cable with a 10mm wrench
    • Connect the negative battery cable with a 10mm wrench
  8. Refilling the Coolant (8:52)
    • Tighten the drain plug
    • Insert a funnel into the radiator opening
    • If you are reusing coolant, filter the coolant with a t-shirt
    • Replace the radiator cap

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:38 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench



This part replaces:

  • OE # 19000PSLF513
  • OE # 19030PLC003
  • OE # 19015PLC003
  • Partslink HO3115115
  • Hollander 674-59604
  • Dorman 620-219

Vehicle Fit

  • 2001 Honda Civic Radiator Cooling Fan Assembly for Models with Nippondenso Style Radiator
  • 2002 Honda Civic 4 Door Sedan Radiator Cooling Fan Assembly
  • 2002-2005 Honda Civic 2 Door Coupe Radiator Cooling Fan Assembly
  • 2003-2005 Honda Civic 4 Door Sedan Radiator Cooling Fan Assembly (excluding Hybrid Models)
Part #: 1ARFA00025

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est