Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the driver's side master window switch on this 2003 Honda CRV. It is a pretty easy repair. The tools you'll need include a flat blade screwdriver, Phillips screwdriver, and a new replacement switch from 1AAuto.com.
If you're having issues with your power windows working, they might work with this switch but not with the other switches. Obviously, you want to make sure that this lock out button this button when it's activated doesn't allow the other switches to work. But what can happen is this connection gets shorted out and then the windows only work from this switch and they don't work from the other ones. Another thing that can happen is they do work from the other switches but they don't work from this one. That usually means that this switch has been shorted out.
You pry gently right under that corner and it comes up. Then you put your screwdriver in. Pry gently on the outside here in the front. Lift this panel up and reach underneath. There's a button right here for your mirror switch. Press that button, undo the mirror switch, and then there's also the same thing in your window switch. There's a button that you can reach from the front, here. It's actually green. Press that button. Here's that block. There's a button the button is right here. You just got to press it. Get your hand in there, press that button, and it will work.
Pry the panel off. On the backside, there are three Phillips screws that hold the switch to the plate. Just fast-forward here as I remove those three Phillips screws. Now the switch comes off. New switch from 1A Auto is just like the old switch. Put it right in place. Use your original screws. Start them in place first, and then tighten them up. Fast-forward again, here. Like I said, I start the screws in first and then tighten them up with the Phillips screwdriver. It looks like they're on there nice and snug. Now connect your main harness. Bring this rear harness up, and you connect that. Push down into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the master window switch, the driver's front window switch, on this 2003 Honda Civic. Many times the switches on these cars get wet and short out. It's a fairly straightforward replacement and it is a similar procedure for any '01 to '05 Civic. The tools you'll need are a small flat blade screwdriver, a Phillips screwdriver, and a door panel clip tool or a putty knife to help to pry the door panel off.
To remove your door panel, start up here and pull firmly on that piece of trim. Take a small screwdriver, right in the top inside your door handle you'll see a little indent, a little door that comes down. Now use a screwdriver or just your fingernails and pull off this panel right here. Just pull firmly out at the front and it comes off. Then there are two Phillips screws in here and right in here. You need to remove those. I'll speed up, here, as I remove those screws, again, just using a Phillips screwdriver, and get those out. Sometimes they don't come all the way out of the door and that's fine, when you pull the door panel off, just watch where they might drop out. After you do those then there are two screws right in that door handle, remove those. Pull your door handle off. There is a little tab on the back of your door lock switch. Press the tab to disconnect. There's a clip that holds the door lock rod on. You can use a screwdriver or your finger to push the clip off and pull that up and off. Then there's a little tab right here for your power window switch. Press that and disconnect your power window switch. Now, using a door panel clip tool, put it right in behind here up until you meet a clip. Pull it out and go around the clip. Pull your door panel up and off. While doing that, a couple of clips came off. Just slide the clips right back in place, there and one right down here.
On the inside of your door panel, to remove this switch, there are three screws here. Remove them. I'm going to speed up the film here as I remove those first three screws. Then, on the other side, there are two more. Now this panel comes out. There's one more screw here. Now, you want to separate the top here, pry out on a couple of little tabs, and now, the switch comes right out with three screws.
Your new switch from 1A Auto is exactly the same as the old one and goes right in. I'll speed up. Notice I feed each screw in, start it by hand first and then go through and tighten them up with the screwdriver and tighten them up firm. You don't want to over-tighten them though. For the tab right here, make sure that goes under right down and pull it over. Snap it right together. Snap that right in here. Speed up, here, as I put the four screws that go in the back side. I feed them in by hand first to make sure they're started and then tighten them up nice and firm. Then turn your panel over and do the same thing for the two screws on the outside. Take your lock harness. It goes up through here and your panel part through there. With it up toward the window, push it down, and lock that all the way around. Take your door handle, clip the rod down in and the lock clip on. Connect your lock button and put the front end first and put that into place. Fast forward, here, as I put those two screws that hold the door handle in place back in and tighten them up firmly. Hook your harness up and use two Phillips screws. And speed it up again as I install the two screws that hold the door pull part of the panel in place. Put the back in first and snap it right on. The two little tabs go on the bottom, snap that in place and then, for this corner trim here, snap that in place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
