Replaces

2001-2005 Honda Civic Rear Wheel Bearing & Hub Assembly Driver or Passenger Side for L4 1.7L Models with ABS & Rear Drum Brakes

Part Details

  • Front / Rear Location: Rear

This part replaces:

  • Hollander 538-58880
  • OE # 42200S5A008

  • New

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) REAR
  • Replaces dealer part number: 42200-S5A-008, 42200S5A008
  • Fits 4 Lug Wheel
  • New studs already installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with Rear Drum Brakes only
  • Correct for models with ABS (Anti-Lock Brakes)

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:44)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Wheel Speed Sensor (1:10)
    • Remove the 10mm bolt behind the wheel speed sensor
    • Wiggle the speed sensor out
  3. Removing the Brake Shoes (1:49)
    • Strike the rotor/brake drum with a hammer if it will not come off
    • Remove the rotor/brake drum
    • Remove the two brake shoe springs with the vise grip pliers
    • Twist off the front retaining spring with the vise grip pliers
    • Hold the retaining pin in place by hand
    • Pry off the brake retainer with a flat blade screwdriver and turn it off the pin
    • Remove the brake shoe
    • Remove the retainer pin
    • Repeat the process for the other side, letting the rear shoe hang on the e-brake
    • Remove the adjustor
    • Rotate the e-brake shoe with vice-grips
    • Push the brake shoe off the e-brake
  4. Removing the Rear Bearing (4:00)
    • Remove the dust cap with a chisel and hammer
    • Insert a tapered punch into the punched slit between the retainer and nut
    • Tap the punch to separate the nut
    • Remove the 32mm nut axle nut
    • Tap the back of the wheel hub from the back of the spindle
    • If the inner race is stuck to the spindle, work it off with a chisel and hammer without scoring the spindle
  5. Installing the New Rear Bearing (5:44)
    • Inspect your spindle for scores, gouges, or any other damage
    • Slide the wheel bearing onto the hub
    • Tighten the 32mm axle nut
    • Torque the axle nut to 134 foot-pounds
    • Punch the outer ring of the axle nut into the keeper with a chisel and hammer
    • Tap the dust cap into place
    • Spin the wheel bearing and listen for grinding or crunching sounds
  6. Reinstalling the Brake Shoes (7:11)
    • Secure the end of your e-brake cable with vise grip pliers
    • Push the spring back with the hook on the e-brake spreader
    • Hook the lower brake spring into the shoe brake
    • Insert the retainer pin in the back
    • Insert the retainer clip over the pin
    • Press the retainer clip into place
    • Press the clip down and rotate the pin to keep it in place
    • Hook the spring into the remaining pad underneath the tab
    • Repeat the process for the other side
    • Spin the star wheel on the adjustor so it's clamped together
    • Insert the adjustor into place with the longest leg facing you
    • Insert the adjustor arm into place
    • Hook the retainer spring to the brake shoes
    • Adjust out your brake shoes by turning the star wheel up with a flat blade screwdriver
    • Replace the rotor/brake drum
  7. Reattaching the Wheel (10:36)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
  8. Installing the Wheel Speed Sensor (10:39)
    • Insert the wheel speed sensor into place
    • Tap it with an extension and dead blow hammer if necessary
    • Tighten the 10mm bolt to the sensor
  9. Reattaching the Wheel (11:10)
    • Lower the vehicle to the ground
    • Torque the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Rubber Mallet
  • Jack Stands
  • Chisel
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 32mm Socket
  • 19mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(11:37 min)

Tools List:

    General Tools

  • Rubber Mallet
  • Jack Stands
  • Chisel
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 32mm Socket
  • 19mm Socket
  • 10mm Socket



This part replaces:

  • Hollander 538-58880
  • OE # 42200S5A008

Vehicle Fit

  • 2001-2005 Honda Civic Rear Wheel Bearing & Hub Assembly Driver or Passenger Side for L4 1.7L Models with ABS & Rear Drum Brakes
  • 2003-2005 Honda Civic Hybrid Rear Wheel Bearing & Hub Assembly Driver or Passenger Side for Models with Rear Drum Brakes
$ 33.95
Save 71%
List: $116.17 Save: $82.22
Part #: 1ASHR00151

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est