Replaces

1988-1991 Honda Civic Front Brake Pads Semi-Metallic (excluding EX Models) (excluding All Wheel Drive Models)

Part Details

  • Front / Rear Location: Front
  • Brake Pad Friction Material: Semi-Metallic

  • New

This front brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • 4 Piece Front Brake Pad Set
  • Direct replacement
  • Professional Grade Semi-Metallic Brake Pads

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:51)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Inspecting the Brakes (1:12)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. Removing the Brake Pads (1:26)
    • Remove the two 12mm bolt from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pull the brake pads off by hand
  4. Removing the Brake Rotor (1:59)
    • Remove the two 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the two Phillips head plugs from the rotor with a Phillips bit and ratchet or an impact screwdriver and hammer
    • Pull the rotor off
  5. Preparing the New Brake Pads and Rotors (2:35)
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Apply grease to the brake pad tabs
    • Apply grease to the caliper slides
    • Clean the brake pad slides with a wire brush
  6. Installing the New Brake Rotor (3:20)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Slide the rotor on
    • Insert the two Phillips head plugs into the brake rotor
    • Put the bracket back into place
    • Start the 17mm bolts by hand
    • Tighten the bolts to 85 foot-pounds of torque
  7. Installing the New Brake Pads (4:14)
    • Apply grease to the brake caliper slides
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the 12mm bolt by hand
    • Tighten the 12mm bolt
  8. Reattaching the Wheel (5:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  9. Testing the Brakes (5:20)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Mineral Spirits
  • Bearing Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Pipe Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Impact Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 12mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:54 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Mineral Spirits
  • Bearing Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Pipe Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Impact Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 12mm Socket




Vehicle Fit

  • 1984-1985 Honda Accord Front Brake Pads Semi-Metallic
  • 1988-1991 Honda CRX Front Brake Pads Semi-Metallic (excluding HF Models)
  • 1988-1991 Honda Civic Front Brake Pads Semi-Metallic (excluding EX Models) (excluding All Wheel Drive Models)
  • 1992-1998 Honda Civic Front Brake Pads Semi-Metallic (excluding EX Models) (Without ABS Brakes)
  • 1999-2000 Honda Civic Front Brake Pads Semi-Metallic (excluding EX Models) (excluding SI Models) (Without ABS Brakes)
  • 1993-1997 Honda Civic Del Sol Front Brake Pads Semi-Metallic (excluding VTEC)
$24.95
Part #: 1ABPS00056

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est