Replaces

2005-2008 Ford F150 Truck Heater Blower Motor with Fan Cage

This part replaces:

  • HOLLANDER 615-00642
  • OE # 2C3Z 19834 AA
  • OE # 6L1Z 19805 B

  • New

This Ford & Lincoln full size truck front blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 2C3Z 19834 AA, 2C3Z19834AA, 2L7H 19805 DA, 2L7H19805DA, 5L34 19805 BA, 5L34 19805 BB, 5L3419805BA, 5L3419805BB, 5L3H 19805 BB, 5L3H19805BB, 6L1Z 19805 B, 6L1Z19805B, MM869, MM930, MM938
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • Replaces the front blower motor on vehicles that have a front and rear unit

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Disconnecting the Battery (0:38)
    • Disconnect the battery cables with an 8mm socket and ratchet
  2. Removing the Air Bag Fuse (0:57)
    • Pull off the fuse box panel
    • Pry off the fuse box cover with a flat blade screwdriver
    • Pry the fuse puller out of the fuse box cover
    • Pull out the red fuse marked 10 with the fuse puller
  3. Removing the Air Bag Assembly (1:31)
    • Pry the screw covers off the steering wheel with a flat blade screwdriver
    • Remove the two 8mm bolts from the steering wheel
    • Pull the air bag assembly forward
    • Disconnect the air bag assembly wiring harnesses with a pick
  4. Removing the Cruise Control Switches (2:39)
    • Disconnect the cruise control switch wiring harnesses
    • Remove the two 8mm nuts from each switch
    • Pull off both switches
    • Pry the wiring harnesses out of their clips with a flat blade screwdriver
    • Pull out the harnesses
  5. Installing the Cruise Control Switches (3:53)
    • Feed the cruise control switch wiring harnesses into place
    • Clip the cruise control switch wiring harnesses into place
    • Connect the cruise control switch wiring harnesses
    • Push the cruise control switches into place
    • Connect the cruise control switch wiring harnesses to the cruise control switch
    • Fasten the two 8mm nuts onto each switch
  6. Installing the Air Bag Assembly (5:04)
    • Straighten the steering wheel
    • Connect the air bag assembly wiring harnesses
    • Push the air bag assembly into place
    • Insert the two 8mm bolts into the steering wheel
    • Push the two screw covers onto the steering wheel
  7. Installing the Air Bag Fuse (5:49)
    • Push the air bag fuse into place
    • Push the fuse puller into the fuse box cover
    • Push on the fuse box cover
    • Clip on the fuse cover panel
  8. Connecting the Battery (6:11)
    • Connect the battery cables with an 8mm socket and ratchet

Tools needed for replacement:

    General Tools

  • Pick

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Wrenches - Metric

  • 8mm Wrench

How-to Video:

(06:51 min)

Tools List:

    General Tools

  • Pick

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Wrenches - Metric

  • 8mm Wrench



This part replaces:

  • HOLLANDER 615-00642
  • OE # 2C3Z 19834 AA
  • OE # 6L1Z 19805 B

Vehicle Fit

  • 2003-2006 Ford Expedition Front Heater Blower Motor with Fan Cage
  • 2004 Ford F150 Truck Heater Blower Motor with Fan Cage (excluding Heritage Models)
  • 2005-2008 Ford F150 Truck Heater Blower Motor with Fan Cage
  • 2006-2008 Lincoln Mark LT Heater Blower Motor with Fan Cage
  • 2003-2006 Lincoln Navigator Front Heater Blower Motor with Fan Cage
$60.45
Save 66%
List: $177.06 Save: $116.61
Only 5 left in stock
Part #: 1AHCX00079

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est