Replaces

1992-1992 Olds Custom Cruiser Heater Blower Motor with Fan Cage

This part replaces:

  • HOLLANDER 615-0464

  • New

This blower motor with fan cage is a new, aftermarket replacement part.

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Specifications:

  • 2 spade terminal with connector
  • Includes fan cage impeller
  • New not remanufactured
  • Direct replacement
  • Built to strict quality control standards

For some vehicles the blower motor is different depending if your car is equipped with Air Conditioning (A/C) or not. Whenever possible match up the specifications of the blower motor with your original, to ensure you are getting the correct one.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Blower Motor
    • Remove two 13mm nuts from the blower motor bracket
    • Pull out the bracket
    • Disconnect the blower motor wiring harness
    • Remove the lower four 7mm bolts from the blower motor
    • Remove the final 7mm bolt from the blower motor
    • Pull out the blower motor
  2. Preparing the New Blower Motor
    • Remove the cushion from the old blower motor
    • Slide the cushion on to the new blower motor
    • Lock the cushion into the mounting holes
  3. Installing the New Blower Motor
    • Push the new blower motor into place
    • Remove the drain elbow from the old blower motor
    • Install the drain elbow onto the new blower motor
    • Put on the blower motor cover
    • Position the drain elbow and wiring harness
    • Insert the five 7mm bolts into the blower motor
    • Point the drain hose down
    • Connect the blower motor wiring harness
    • Put the bracket into place
    • Fasten the two 13mm nuts onto to the bracket
    • Tighten the 13mm nuts to between 20 - 25 foot-pounds of torque

How-to Video:

(05:45 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Swivel

  • Sockets - Metric

  • 13mm Socket
  • 7mm Socket



This part replaces:

  • HOLLANDER 615-0464

Vehicle Fit

  • 1992-1999 Buick LeSabre Heater Blower Motor with Fan Cage
  • 1991-1996 Buick Park Avenue Heater Blower Motor with Fan Cage
  • 1986-1993 Buick Riviera Heater Blower Motor with Fan Cage
  • 1991-1996 Buick Ultra Heater Blower Motor with Fan Cage
  • 1991-1993 Cadillac Deville Heater Blower Motor with Fan Cage
  • 1991 Cadillac Eldorado Heater Blower Motor with Fan Cage
  • 1991-1993 Cadillac Fleetwood Heater Blower Motor with Fan Cage
  • 1991 Cadillac Seville Heater Blower Motor with Fan Cage
  • 1986-1999 Olds 88 Heater Blower Motor with Fan Cage
  • 1991-1996 Olds 98-Regency Heater Blower Motor with Fan Cage
  • 1992 Olds Custom Cruiser Heater Blower Motor with Fan Cage
  • 1992-1995 Olds Delta 88-Royale Heater Blower Motor with Fan Cage
  • 1991-1992 Olds Toronado Heater Blower Motor with Fan Cage
  • 1991-1999 Pontiac Bonneville Heater Blower Motor with Fan Cage
$60.45
Part #: 1AHCX00017

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est