2004-2005 Chevy Classic Fuel Tank Filler Neck

This part replaces:

  • OE # 22688928
  • DORMAN 577-915

  • New

This replacement fuel filler neck is just what you need to get your vehicle in good working order again!


  • Fits between outer 1/4 panel and filler hose
  • Configuration:
    • Main filler tube
    • Length - 34"
    • Tube O.D. - 1"
  • Replaces dealer part numbers: 22688928
  • Built to strict quality control standards
  • Replaces any gas tank filler neck that is rusted, rotted, bent, or damaged from an accident

Note: If there is any question about this filler neck fitting your vehicle, please ask your local dealer if the above OE numbers will fit your application.

This fuel filler neck is a great replacement and has good cost savings over a gas tank filler neck from the dealer.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Fuel Filler Neck
    • Open the fuel door
    • Twist off the gas cap
    • Remove the two T20 Torx screws from the fuel filler neck
    • If the screws do not remove easily, pull them out with pliers
    • Pull out the locking clips
    • Loosen the fuel hose clamp with a flat blade screwdriver
    • Separate the hose from the filler neck
    • Remove the 10mm bolt from the filler neck bracket
    • Pull the filler neck out of the gas compartment from behind
    • Pull out the filler neck insert
    • Pull the filler neck out through the gas compartment
  2. Installing the New Fuel Filler Neck
    • Push the new filler neck into place through the gas compartment
    • Push the filler neck insert into place
    • Insert the locking clips onto the filler neck
    • Insert the two T20 screws into the filler neck
    • Twist on the gas cap
    • Close the fuel door
    • Insert the 10mm bolt into the filler neck bracket
    • Position the fuel hose clamp
    • Connect the hose to the filler neck
    • Tighten the hose clamp with a flat blade screwdriver

How-to Video:

(05:08 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands

  • Torx Drivers & Sockets

  • T20 Torx Driver

This part replaces:

  • OE # 22688928
  • DORMAN 577-915

Vehicle Fit

  • 2004-2005 Chevy Classic Fuel Tank Filler Neck
  • 1998-2003 Chevy Malibu Fuel Tank Filler Neck
  • 1998-1999 Olds Cutlass Fuel Tank Filler Neck
Save 68%
List: $162.90 Save: $110.95
Part #: 1AFMX00059

- Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est