Replaces

2005-2008 Dodge Magnum Fuel Injector (Set of 6) for V6 2.7L (Mopar)

Part Details

  • Brands: Mopar
  • Quantity: Set of 6

This part replaces:

  • Mopar 4591986AA

  • New

MOPAR FUEL INJECTORS: 4591986AA

These fuel injectors are genuine Mopar replacement parts! They are the very same pieces you would receive if purchased from your local dealer!

Specifications:

  • (6) - Brand New Mopar Fuel Injectors
  • Replaces dealer part number: 4591986AA
  • Built to strict quality control standards
  • Direct replacements
  • 100% factory tested
  • Correct for models with the following engines per application:
    • V6 2.7L
    • V6 3.5L
    • V6 4.0L

NOTE: Sold as a Set of 6 injectors. For a single, please see our other listings.

Some symptoms of a bad fuel injector are: Stalling, hard starting, hesitation on acceleration, as well as a possible service engine light, and error code.

Your engine size can usually be found on a white sticker in the engine compartment near the radiator. If needed, your VIN code is the 8th digit of your vehicles Vehicle Identification number. The VIN can be found on the bottom driver side corner of the windshield and on your registration. Some refer to the VIN code as the Serial Number.

These are electrical parts and are all tested before they leave our warehouse. This electrical item is not returnable; it is only eligible for exchange.

Now you can have genuine Mopar fuel injectors shipped right to your door!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Release the pressure from the fuel system (0:48 in the video)
    • With the engine running, remove the fuel pump relay from the fuse block.
    • This will stop the engine and release the pressure in the fuel system.
  2. Remove the upper intake manifold. (0:55 in the video)
    • Use a 10 mm socket and ratchet to remove the upper intake manifold.
    • Disconnect the air pressure sensor.
    • Remove the 8 ten mm bolts.
  3. Remove the air box (1:40 in the video)
    • Loosen the clamp and the bolt securing the air box.
    • Disconnect the hose and wiring harness.
    • Remove the 13 mm bolt that goes into the throttle body and brace.
    • Pull the gasket off the top of the cowl and now you can remove your intake manifold.
  4. Remove the fuel injectors (2:17 in the video)
    • Remove the four 10 mm bolts under the intake manifold to get at the fuel rails.
    • Pull the fuel rails up and out.
    • Stuff a clean rag in the intake to keep anything from falling into it. (this would be bad)
    • Disconnect the wiring harness connectors from the injector.
    • Unclip the fuel injector.
  5. Install the new fuel injector (3:35 in the video)
    • Clip in the new fuel injector.
    • Plug in the wiring connector.
    • Once you’ve replaced all the injectors, begin reassembly.
  6. Reassemble the intake manifold (4:07 in the video)
    • Push your fuel rails back into place.
    • Apply some loc-Tite to the four 10 mm bolts and snug them down with a socket and ratchet.
    • Bolt down the intake manifold.
    • Torque the 10 mm bolts to 105 inch/pounds
  7. assemble everything else (5:13 in the video)
    • Reconnect the air pressure sensor
    • Bolt in the 13 mm bolts securing the bracket to the throttle body, and torque to 15 foot/lbs
    • Reinstall the air box.
    • Tighten the clamp that connects the intake to the throttle body
    • Reconnect the hose and double check all of your sensors are connected.
    • Reinstall the fuel pump relay.
    • Seat the cowl gasket.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Liquid Thread Locker

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket

How-to Video:

(06:23 min)

Tools List:

    Materials, Fluids, and Supplies

  • Liquid Thread Locker

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket



This part replaces:

  • Mopar 4591986AA

Vehicle Fit

  • 2005-2010 Chrysler 300 Fuel Injector (Set of 6) for V6 2.7L (Mopar)
  • 2005-2010 Chrysler 300 Fuel Injector (Set of 6) for V6 3.5L (Mopar)
  • 2005-2006 Chrysler Pacifica Fuel Injector (Set of 6) for V6 3.5L (Mopar)
  • 2007-2008 Chrysler Pacifica Fuel Injector (Set of 6) for V6 4.0L (Mopar)
  • 2004-2010 Chrysler Sebring Fuel Injector (Set of 6) for V6 2.7L (Mopar)
  • 2007-2010 Chrysler Sebring Fuel Injector (Set of 6) for V6 3.5L (Mopar)
  • 2008-2010 Chrysler Town & Country Fuel Injector (Set of 6) for V6 4.0L (Mopar)
  • 2008-2010 Dodge Avenger Fuel Injector (Set of 6) for V6 3.5L (Mopar)
  • 2008-2009 Dodge Avenger Fuel Injector (Set of 6) for V6 2.7L (8th Vin Digit R) (Mopar)
  • 2009-2010 Dodge Challenger Fuel Injector (Set of 6) for V6 3.5L (Mopar)
  • 2006-2010 Dodge Charger Fuel Injector (Set of 6) for V6 3.5L (Mopar)
  • 2006-2010 Dodge Charger Fuel Injector (Set of 6) for V6 2.7L (Mopar)
  • 2008-2010 Dodge Grand Caravan Fuel Injector (Set of 6) for V6 4.0L (Mopar)
  • 2009-2010 Dodge Journey Fuel Injector (Set of 6) for V6 3.5L (Mopar)
  • 2005-2008 Dodge Magnum Fuel Injector (Set of 6) for V6 2.7L (Mopar)
  • 2005-2008 Dodge Magnum Fuel Injector (Set of 6) for V6 3.5L (Mopar)
  • 2007-2011 Dodge Nitro Fuel Injector (Set of 6) for V6 4.0L (Mopar)
  • 2004-2006 Dodge Stratus Fuel Injector (Set of 6) for V6 2.7L (Mopar)
$335.45
Save 11%
List: $378.00 Save: $42.55
Only 2 left in stock
Part #: MPEEK00005

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MOPAR
Brand #: 4591986AA

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est